Switching

Does anybody know...When the master in a 3750 stack has a memory allocation error and is about to shut down it issues the command %SYS-5-RELOAD: Reload requested Reload Reason: snmp shutdown request. Is this requesting the reboot of the switch or the...

Greating and thanks a lot for all help,Can somone check my configuration.I got a C3570 Core switch ( Router and my 10 secondary switches connected to the core switch) and 10 C2960 sec switches ( voor devices).We want to redirect the Guest user to int...

HiWe have an issue in what we have 2 datacentres connected by a layer 2 wan link, LES circuit. if we disconnect one of the links, the whole link drops between the sites, any ideas why this would be, would UDLD solve this ?cheersCarl

Hello... can anyone tell me if the output below indicate an issue?Dec  7 11:48:01: IP: tableid=0, s=192.168.20.2 (local), d=10.0.2.49 (Vlan1), routed via FIBDec  7 11:48:01: IP: s=192.168.20.2 (local), d=10.0.2.49 (Vlan1), len 100, sendingDec  7 11:4...

2651XM eth0 configured with IP address (10.1.1.1/24), secondary IP address (172.16.1.1/24) and connected to fa0/1 on a 37503750 has int VLAN100 (10.1.1.2) and VLAN 200 (172.16.1.0/24) but without an SVI.  The only way I can get any connectivity is to...

Hi,Im facing an issue with  Cisco 1252 AG access point   & Cisco 3750-E -24 PD switch with the inline power.When connecting the access point to the switch, the POE ports in the switch doesnt provide sufficient power to the access point radio.The acce...

Hi All,     I would like to know if we can replace the sockets in one of the power unit of C6509E(which has a redundant power supply) online.Should I have to power down the chassis to replace the sockets in both the power units of C6509E?Any document...

Hi,We have a cisco WS-C3560G-24TS switch as a core.there some servers connected to this switch. When we tested for available bandwidth between 2 servers using a tool "iperf". when ran it multiple times the results varied from 500MB to 700 MB.These 2 ...

Hi,        Hi can anyone explain what is the difference between SSH version 2 and Version 3.Thanks in advanceRegardsGopi

Hi Dears,I am Saravanan, working as a network engineer. In one of my customer have 4Mbps Internet, They have 4 vlan groups. Now current setup is Sharing the 4 mbps Internet to every body, but they want to limit the bandwidth in vlan groupwise.Conside...