Switching

Hi,We have 2 Internet Routers with 2 ADSL Ports on individual routers.Attached n/w diagram will give you an idea of the setup.The requirement is: all the time 4 ADSL to be used for Internet accessing purpose.ASA is in single-context mode. On Core sw...

We run DMZ and Internal network totally seperate, I have a business request to connect an IBM Enclosure to DMZ switch (as trunk) and to Internal network switch ( as trunk) so that some blades can talk to DMZ and some to internal network. If I have tw...

Hi allare these all valid commands for the 6500? and what do they all do ?Switch(config)#redundancySwitch(config-red)#main-cpuSwicth(config-r-mc)#auto-syn standardredundancy reload peer redundancy force-switchover

Hi Sir,I'm testing LACP etherchannel with ISG feature on a Cisco 10008 router.According to the following URL,http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/gigeth.html#wp1111405ISG IP sessions feature is not supported on GEC bundles on a PR...

I have a design issue which I'm not too sure how to solve.Essentially, I am in the process of setting up a single network to spread over two physical sites which are linked together by a long distance link.Each site has a VSS Cisco and my idea was to...

Hi all,Since the understanding of IPv6 itself is not a big problem anymore, I am on the search of documents how to deploy it on campus Networks.Example: I have a building with 10 routed IPv4 /24 Subnets and want to run dual-stacked. Are there the sam...

I need to upgrade the IOS on a router, however the new IOS image is too big to be supported by the TFTP Server. Do you have any suggestions

hello all,I have been trying to find out which CAT OS version on Cisco Swithc 6509 (or 6500 series) switches, will support ssh v2?can some on eplease point me to right direction please?Regards,Masood

Is there a way to force an mtu size on an interface. My only choise is 9216. I actually want to set to to 200 for testing purposes.

can any one provide a good method on how to subnet, find a range, identify to witch ip belong to witch range, basically anything that can help...pst: None of those long explanation. Thanks

Hi,I'm pretty familiar with ALCs, and understand that every access list has an explicit deny any any, so if you just have an "empty" access list it will block all traffic.I just added two extended access lists to a physical interface, but left them e...

How does a switch or router decide what IP address to give out via a CDP? I have some devices handing out an address that no one can connect to and it is causing issues with automated discovery & mapping.Thank You

Can anyone point me to where I can download the archive.tar file that is needed to manage a 3500 switch via web. Can't find it anywhere.Thanks