Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

A new Financial Bank has just introduced itself. Its plan is that, in a year they are going to open 12 new local offices.The request is: what will the ideal Cisco Equipment will be to be implemented in the Main office.Its planned that in the main off...

We have a router with 3 subinterfacessub 100 for PC'ssub 200 for Phonessub 300 for Call managerThis links to a Cisco 3560 (no routing) trunked.On this 3560 we have a wireless access point and 3 PC's. The wireless access point has 2 wireless handheld...

glenthms by Level 1
  • 2625 Views
  • 6 replies
  • 0 Helpful votes

Hi, I just want to create 2 vlans. Vlan2 and vlan3. I have created them and they are in the database but when I try and bring up one, the other goes admistratively down and vice versa. Anyone have a idea of what I am doing wrong?

Resolved! SFP error

Hello,Last week an SFP GLC-SX-MM gave the following errors in the log:Mar 3 11:34:59: %OSPF-5-ADJCHG: Process 1, Nbr 10.14.254.254 on GigabitEthernet1/1 from FULL to DOWN, Neighbor Down: Interface down or detached - ctw_check_error_bit - on!!!!!! - ...

I have a question about spanning a vlan source...I have two 6500's plugged into each other with a L2 etherchannel, and I have a network monitor tool plugged in to both switches. I'm trying to span a source vlan which is getting over 100Mb in traffic...

niro by Level 1
  • 461 Views
  • 2 replies
  • 0 Helpful votes

Folks, I took an older 2621 and upgraded the ram & flash. I inserted a AIM vpn card. I now want to upgrade the IOS so the AIM card shows up in my config. Ill be doing site to site ipsec VPNS...Which one do you guys recommend?

Hi guys,Iam in year one ccna and for my first assignment I have to design a network with:3 departments each in there own subnet salesX50 hosts, WarehouseX30 hosts and AdminX20 hosts.There is a lot of other stuff i have to do for the assignment but I'...

I'm running HSRP on H1 and H2, tracking the interfaces to the routers and between H1 & H2 Trunk link. I'm routing between R1, R2, H1 and H2's connections. I've been getting mixed reviews on the placement of the Root Bridge. I feel that the placemen...

s.marino by Level 1
  • 526 Views
  • 9 replies
  • 0 Helpful votes

Hi,I'm having an issue with a Catalyst 3648 POE switch and a motorola wifi antenna. Essentially my logs get flooded with the errors below and eventually the switch shuts down the port because of flapping.From what i can tell the device is not POE co...

thanmad by Level 1
  • 1595 Views
  • 3 replies
  • 0 Helpful votes

HelloWe're in the process of multihoming our HP Enclosures. I've attached diagrams of the current and proposed network/server setup. Initially we configured HSRP so that the server VLAN 100 gateway could float between the 4507 and the 6509. Redundant...

I have a question concerning a Cat 3750.Presently, I have a couple VLAN's configured on this LAN switch. We only have 1 user on the switch (planned for many more). I have the following VLAN's configured: VLAN 200 managmentVLAN 201 User VLANI have...

I'm attemtping to setup a small lab.I have one 3550 SMII have several VLANs defined, see config below. I have a DHCP server - 10.10.10.2And a route to the rest of the network via 192.168.0.90.From the switch, I can ping the VLAN interfaces (as long ...