Switching

Dear all,i got the strange task to implement 802.1x with 2948 ge tx switches. I configured a lab.my problem i get back the information of microsoft ias which i use:A malformed Radius Message was received from client 2948-SW...The data is the RADIUS m...

Hi all, Can anyone tell me how I get my cisco switch to send snmp traps to inform me of certain statuses etc, and what program can I use to receive these traps ?

When I power up my Catalyst 3550 switch, it boots up and shows "switch:" prompt. and it takes no command afterwards. I wonder what command prompt is "switch:". Please help.

Hi,I am looking for a link or links that show the relationship betweek logging severity levels and log messages? I want to find out what log messages are related to what severity level. rgds,

We have some security requirements to disable TFTP on certain routers and switches. What is the best (easiest) way to accomplish this? Looking at NO SERVICE CONFIG command, but not sure what all will result from this. Thanks for any suggestions

While trying to upgrade an image on a 3750 the atchive/download crashed causing the image to corrupt. Now the switch boots up in to "switch :". The flash has been formatted. I would like to know if I can load andrun image on it to get it to boot up? ...

We have two non-Cisco, redundant firewalls at our office. Also we have two WAN ISP's. What type of Cisco switches would be sufficient to drop in front of the firewalls? We would only need 8 ports max, and all of them doing 100mbps is fine. Lastly...

So from other testing and my understanding if i do this:line vty 0 15rotary 5then i should be able to telnet to this device on port 3005.I have done this on routers before, and when i tried it on a 2 differnt 6509's i could not establish a connection...

Wondering if you've encountered an issue with Cisco Network Assistant v5.4. With the previous version(5.3) I could see and modify all my cisco switches(<40) but after upgrading to 5.4 I only have access to the WS-2950 and the WS-4507R models. I can't...

I have a 3550 (c3550-ipservicesk9-mz.122-35.SE5.bin), an ME3400 (me340x-metroaccess-mz.122-40.SE.bin) and two MRV 912 switches. All three support MST, which (by all indications) I think I have setup correctly.- 3550 F0/1 connects to 3400 F0/1- 3550 ...

Hello,I would like to know the permitted non operating (storage) altitude of the router 2811 and the Catalyst C6500-E.Is it possible to tell me which document I can download (or send it to me) so that I formally show the evidence to my customer ?Than...