Switching

I am unable to ssh into ACE module. telnet works. I have defined the management class where telnet and ssh both are allowed and the service policy has been applied to the correct VLAN. All traffic is permitted between the VLAN. Is host key pair requi...

Hi all, I know with multi mode fiber we can see the laser at the end, should this be true with single mode also ?

I have a 1760 router running 12(3)24 IPBase. I am having trouble adding a command to my DHCP pool. I need to add the command: option 66 ascii "Pano Logic" to the DHCP pool. Unfortunately, the router won't let me put a space between Pano and Logic...

Can someone tell me what is the meaning of the statement, "ip dhcp use vrf connected"?What does this statement do?Adil

Can anyone help me understand the real differences between the "IP base" and "IP services" IOS's for the 3550, 3560, and 3750 series switches. Thanks for the help.

Hi Everyone!Can you recommend me a switch to terminate about 200 fiber links at the access layer? Only layer 2 required. Fiber has been pick due to the long runs. Cost is a concern, 100mb ports are fine.

Greetings All, The following error has me stymied. This error displays itself, anyone know the source/fix for this? Is it a bad EEPROM?TLV-3-UPDATE: Unable to write type 199

Hellowhen mls qos is enabled on 3560 catalyst switch, if the speed of the interface is 100Mb,ther are some drop in transmit, see below. Some body can help me ?sho platform port-asic stats drop gig 0/1 Interface Gi0/1 TxQueue Drop Statistics Queu...

Network with an "old" Catalyst 4006 with CatOS 7.4 and a new Catalyst 3560E.I need to establich a GigaBit EtherChannel between the 4006 and a 3560EHow many link can I bundle? I wish (and hope) at least 4-5.Otherwise, can I configure more then ONE Eth...

Hi Teamwe are facing the switch port read write error.plse find the loogs and show module ouput for the same.kindly let us know the solutionRegardsVaibhav

Hi, I've a problem with a port of this switch. This port is completely operational, but the counters of input/output traffic is in Zero. I have a lot of traffic on it (+- 48 Mbps this I can see with MRTG), but I don't know why the counters are in zer...

All,I know this might seem very novice but here goes. If I have a Windows 2003 server acting as a DHCP server with 2 different scopes (1 for computers, 1 for IP phones) and the phones and computers are on different VLANS how do I get the phones to p...

HiIn a documentation about cisco hp interoperatibility it's explained that that versions of IOS implementing the Compliant IEEE 802.1s starts with: 12.2(18) for Catalyst 6500. But when I read the ios release notes the supervisor engine 1 is not menti...

What is the number of spanning tree instances that the VS-S720-10G can support?