Switching

When 6509 (supervisor 720) is booting up, get the following message:CFC2: Currently running ROMMON from S (Gold) Region- RELIABILITY DRIVER: wrong signature on NVFLASHWould be grateful if anyone had any ideas why this message is occurring.

Hi, Can someone explain what is the usage of the 'static' commandwhen used in conjunction with the distribute-list ? I cant' find any explanation abt. this commnad on the command lookup tool. If you look at the example below, does this mean that it o...

We have our main site and DR site.We have a bridged subnet from the main site to the DR site.The routers across the wan connection are the bridge interfaces and the default gateways for the brdged subnbet.There is a windows machine that under normal ...

I have 4 switches connected like: Router->A->B->C->D. I need to get Mac-Address of machines connected to only switch-B ports.When I do Switch-B#show Mac-addressIt will showing all the mac-address of other switches connected machine IP address.Thanks ...

Have set up outbound NAT overload for Internet access and inbound NAT port-forwarding to approx. 18 servers in order to provide access to these servers on the Internet. I do the same configuration for all of the servers, but find that only a few of t...

Hi All, I have just configure an ADSL interface on a router to dynamically connect to BT network for internet connection. Below is my running config: ! interface ATM0/1/0 no ip address no atm ilmi-keepalive dsl operating-mode auto pvc 0/38 dialer poo...

Hi,If i have a line card that has the queue structure 1P2Q2T and i enable QoS, the default bandwidth allocation ratios Q1:Q2 is 5:255 according to CCO documentation.Does this means that if the port is 1000Mbps, Q1 will will get a bandwidth of approxi...

Please provide us the relevent document or link for the procedure to convert the Cisco-IOS to CAT-OS. The SUP-32 part-code is WS-SUP32-GE-3BRegards,Navinder

hi every body!let say two switches, sw1 (vtp client) and sw2(vtp server) are connected as shown below:sw1-------------sw2sw1 has vlan 1,sw2 has vlan 1,2vtp pruning is enabled.According to cisco documents, sw1 does not advertise the use of vlan2 so sw...

I have requirements to route between to different subnets but need to isolate the routing from other interfaces on the router. I have a 6509 and need to integrate an old route that is not up to par. I was looking at map-routes to keep the routing on ...

what is Management VLAN ??

hello all,I have a cisco Aironet 1310 series which am having problem with the signal strength. This box came with 8 dbi Omni antenna gain and am told this can go upto 5km raduis. After configuring this equipment, i could not get a link when i move 50...

I'm currently allowing only one mac address on my port, my config look like thisset port security 1/7 enable age 10 maximum 1 shutdownI expect that if I unplug a pc from port 1/7 and plug this same pc back in port 1/7 before the 10 min againg timer e...

Hi All,Does Cat 6509 has that feature like 3550 / 3560 which can *police* and drop traffic on a per-VLAN basis??If so, what is that feature called and would anyone know which IOS train supports it??Cheers,Hunt