Switching

The scheme of the network is on the picture. Router A supposes that router D is ABR/ASBR (review show ip ospf border-routers). And router A doesn't see router H as ASBR.I've checked OSPF databases on routers A and D. Router D doesn't sent LSA type 4 ...

Hi Guys,I'm needing to config a server port as trunk and I'd like to know what are the implications (security, spanning-tree) of having a server port configured as trunk? Do I have to configure anything else on that port for security reasons?Best Reg...

I changed the encapsulation on my Windows XP laptop to 802.3 (from Ethernet II, default). I AM able to ping the local router (802.3 framed ICMP in both directions). But, when I try to ping a remote device off of my subnet it times out (sniffer show...

I would like to know that suppose i have an ABR that is connected to area 1 and 0. Area 1 is normal, i want to advertise default route from this ABR to only area 1 and not area 0, can you kindly tell me the way by which i can achieve this ? i dont th...

Anyone know the amp level of a Cisco 831 router. Cannot find it in any of the user guides.

On a new Cisco 3750 stack implementation, all went well except a number of older Wyse Winterm thin clients. They do not get a link light, or any connection to the stack at all. I have switched out multiple cables and cable types as well as setting ...

Hello!I found strange cycle in values "Total output drops" on one of 3750 GE ports (ios c3750-advipservicesk9-mz.122-40.SE).Values goes in next cycle: 0, 407, 814, 4294966889. But the port/controller/cable have no any physical or logical errors. Port...

Is there a benifit in establishing an ISL trunk between to 3750G switches compared to utilizing the StackWise connections before accessing our core switch?

We are currently experiencing random crashes and packet loss, so I started researching our IOS upgrade path (per tac) and found that our current IOS is listed under the 7600 IOS path, not the 6500 IOS path.Can anyone shed some light on whether or not...

Hi all, when having broadcasts on a lan, what is the normal exeptable limit on a lan ?

Been reading PDF documentation but do not see a clear path outlining the proper upgrade procedure for our 6513 with single 720 SUP.Getting ready to put the 6513 in production and would like to try and upgrade before this to get some experience. We ar...

I have a PIX 506E running with 2 VLANs and for some reason on the logical interface I can't communicate with hosts in the same subnet. The physical interface is good, all hosts talk properly. The networks are autonomous and are not to talk to each ...

Hello, wondering if you guys can give me some feedback.I have a new setup coming up, whereas we will install numorous 3750 access switches, and a couple 6500s with sup720s. Someone once told me I can store the IOS image for the 3750s on the core swi...

Hi,I am planning to use private vlans for customer webservers in DMZ & CAT6509 is having an L2 trunk(port channel) to a non-Cisco Firewall. Since there is a limitation not to configure private vlans using LaCP/EtherChannel, how would I define a promi...