Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

not sure why when i try to boot up the router i get this output. ëû {kïëûk{ ûëû{{{kk { {ûû{{ûk û ïë mÏi have attach a screen shot of the out put.i have tried resetting the router

timt976 by Level 1
  • 517 Views
  • 6 replies
  • 0 Helpful votes

Friends,I have topology like thatc3750 A----c2960-------c3750 Blink between them are configured as trunk. Lets suppose i configured three vlans 10, 20, 30 on 3750 switches. To transport tagged traffic for any vlan from 3750-A switch to 3750-B, i also...

Hi. I have a big network where i see unicast flooding traffic (uft) from other vlans inject in a different vlan (example: uft injection from vlan 1 to vlan 230). I read the document "Unicast Flooding in Switched Campus Networks" but not apply. Any id...

When configuring the IOS SLB sticky feature in the virtual server is the duration parameter that gets defined in seconds the value that the client connection timeout after being idle for x seconds that get defined in the duration parameter? Or is thi...

juan-ruiz by Level 1
  • 657 Views
  • 3 replies
  • 0 Helpful votes

A client complained that when their hub router died, all the spokes in their DMVPN hub and spoke topology all lost their tunnels.The spokes are supposed to be leveraging NHRP to build a database of other spokes' public interface addresses so that the...

HiI have a network which is not very complicated. As in the attached diagram, I have 2 ISPs coming into my network terminated on 2 Adtran routers. There is no load balancing configured due to hardware limitations. There are few VLANs configured on Ad...

Hello.I have this topology: Router 2801 > ASA 5510 > Switch 3560.I was install CNA on server connected to 3560, crate Community and see all device connected to 3560, but cant see ASA and Router.What i have to do on ASA to join it to Community?Regards...

aadilovic by Level 1
  • 635 Views
  • 3 replies
  • 0 Helpful votes

Hi,I have a strange problem with my 2 Cisco 7609. The diagram is as follow:C4006(VLAN 300: 10.10.100.245/22) <------trunking---> C7609-1(VLAN 300: 10.10.103.213/22) <--------trunking--------> C7609-2(VLAN 300: 10.10.103.214/22)VLAN 300 is used for ma...

dongochuy by Level 1
  • 310 Views
  • 1 replies
  • 0 Helpful votes

We're working with an IDS vendor that cannot analyze 802.1Q tagged packets. Currently we have a Catalyst 37xx Stack with several VLAN's using 802.1Q tagging to trunk to a 2821 with several Ethernet subinterfaces. Can we remove 802.1Q tagging and sti...

I'm thinking of deploying VSS in an environment with 200+ servers and 5 IDFs. I'd like to get some feedback.Can anyone comment on a deployment? How complex is it? Any bugs found?Is it ready for prime time?

jaye15394 by Level 1
  • 949 Views
  • 5 replies
  • 0 Helpful votes

I don't know why last night I turn on my pc and can not connect to the Internet. When I ipconfig/all it is showing my ISP Connection-specific DNS Suffix, and DNS; I tried to ping, but it is not. I have another machine it is showing 169.x.x.x. I tried...

We are using non-DHCP in our network environment. I want to avoid ARP spoofing on the switches. But I found at least three approaches related it,1. DAI+ARP ACL: ip arp inspection filter ACL vlan IDs2. IP-MAC binding: arp IP address H.H.H arpa3. IP-MA...

David Lin by Level 1
  • 4271 Views
  • 3 replies
  • 0 Helpful votes