Switching

I am configuring a CAT 6509-E Sup 32 IOS 12.2(33)SXH with WS-X6148A-GE-45AF modules. I wanted to use auto qos but I get errors when enabling it on the above module. The errors state I needed to change the trust state of the ports to COS. I did this a...

Hello,I have two FW, on is a ASA the other one is a FWSM they're conected to each other via a vlan. So each one of the 2 Fw have an interface on the same VLAN.they are connected like this :Fw(10.1.1.1/24) <-> 6500 (used only for layer 2 connectivity)...

Hello,I like to limit the bandwith on a Catalyst Switch with the command:e.q. to 10MBit/Sinterface FastEthernet 0/1Switch(config-if)# srr-queue bandwidth limit 90but the command doesn't work :-(IOS:Switch Ports Model SW Version ...

I have a client that whats his 3750 to shutdown all the access side of his switch if the trunk to the VPLS goes down.I known of no way to accomplish this, has anyone got any ideas?

I have configured many 1602 and 1721 routers and never ran into this problem before. This problem has now happened on two new routers. A 1721 and a 8141 software Ver 12.4 (16). Using a 56 K wic 1 dsu connected to a frame relay I am able to ping and t...

Hi, my CE 500 has an problem, he is an Catalyst Express 500 IOS 12.2(25)FYI have just test all thinks like :Before you configure the switch you need to reset it to the Factory Defaults: 1. Unplug the power cord from the switch. 2. While plugging back...

Hi I would like to know what is the minimum configuration for access by sdm my router with volares manufactured, is a 877. Greetings

I am working on determining a possibility of sending the output of the command "show buffers input-interface vlan 4 header" to the syslog server. The problem we are experiencing is with some multicast applications in our network that send packets wit...

I work for two companies... company (A) gets data from company (B) over the Internet using the same ISP. Sometimes a file has a specific piece of data that seems to make the connection stall/drop in the middle of the FTP transfer. I have attached the...

hello,i have a cisco 2811 with ios Version 12.4(13r)T. i used this router for voice gateway. now i have added another ethernet card into this router,and i would ask if there is a ios version that have a both functionality ( voice + firewall.).thanks ...

I have a 3560G-48PS that seems to get hung up sometimes. It will stop responding to the network(no ping, no telnet). When physically looking at the switch, all port lights that have a device connected are solid green and all blink at the same time....

I am going to be handing off an OC3 to a customer. I currently have a 3550 (2 GBICS) on one end and a 2950 EI 2 GBICS on the other end. Will this work?