Switching

I work for two companies... company (A) gets data from company (B) over the Internet using the same ISP. Sometimes a file has a specific piece of data that seems to make the connection stall/drop in the middle of the FTP transfer. I have attached the...

hello,i have a cisco 2811 with ios Version 12.4(13r)T. i used this router for voice gateway. now i have added another ethernet card into this router,and i would ask if there is a ios version that have a both functionality ( voice + firewall.).thanks ...

I have a 3560G-48PS that seems to get hung up sometimes. It will stop responding to the network(no ping, no telnet). When physically looking at the switch, all port lights that have a device connected are solid green and all blink at the same time....

I am going to be handing off an OC3 to a customer. I currently have a 3550 (2 GBICS) on one end and a 2950 EI 2 GBICS on the other end. Will this work?

Hello,I have a huge network with L3 Switching.I need a tool to find the hosts that which cisco switch and which port of that switch that connected.Does anyone know any tool like that ?Regards

Dear all : Does anyone know how to classification on cisco3560 , using " match vlan" command like cisco3550 supported? I can't find this command on cisco3560,if this command has been replaced,How can I do this request on cisco3560 ? thanks !Ted.

I am having an issue with a cbs3020 for HP. I have two and got the first one setup without issue. In setting up the 2nd one something happened. I have a theory that I ran:aaa authentication login default group tacacs+ local enableaaa accounting comma...

Hi,I have two 512 kbps of link from same ISP and both link were terminated on same router. I have different LAN/WAN pool for both ISP. M using nat on same router but want to do load sharing on both link.How it is possible.Pls help me out, Thanks ..

Hi all, just a quick question, If I route from router a to another router (router b) which has the destination network on one of its interfaces, but router b has a route saying all traffic destined locally route to another router on the same subnet, ...

I have configured my 857w via combination of the SDM and CLI.As it stands I have two issues:1.Unable to obtain DHCP address over WLAN2. MSN messenger is unable to connect.Attached is my config.I would be grateful if someone could point me in the rig...

Hi all, can anyone tell if when using asa firewalls, do they verify the reverse address using dns when connections sourced from outside are being made? I have seen this on other firewall vendors, is this standard firewall practice ?cheers

Team,I have configured port-channel88 on catalyst 6509-E switch but when i tried to configure the this channel on tengigabit interface getting the following error message. ***************************************ERROR MESSAGE**************************...

Hi guys, What is the correct way to determine the memory of a cat6500 running native IOS (sup720)?I see something with sh ver and sh mem, but both don't seem to be correct.

Hi,allIn my production network, some server is placed behind load-balance devices(array) and a firewall. With sniffer, I found the servers sent many packetw with IP Identification field is 0, Does these packets are correct packets?Thanks!