Switching

HII Have to Know the Following:where/when we should take in place/Design the Following Commands in Pim Mode1)sparse-mode2)Dense-mode3)sparse-dense mode4)where/When we should use ip pim send-rp-announce Loopback0.....5)where/When we should use ip pim ...

we are trying to monitor what our network engineers enter as commands when configuring cisco devices. so we think the best solution is to use accounting feature.when configuring aaa (accounting):router(config)#aaa accounting commands ? <0-15> Enabl...

1. Given an L3 GEC comprised of four GigE ports that interconnects a distribution-layer router and an access-layer router, if I have netflow enabled on the distribution end of the GEC, is there any reason/benefit that I should enable netflow on the f...

Hi Gurus,I have a T1 FR circuit between my core router and a remote router. Do I need to configure "network-clock-participation wic 1" global configuration command for proper functioning of FR-T1 circuit? Moreover, what is the differance among the ef...

Hello,i have the following problem and i don't know what is it related to.From time to time (usualy once in 10 minutes) all leds on all access ports changes color to amber for about 5 seconds and then back to green.Users on my network don't report ne...

HI TO ALL I HAVE CATALYST 2950 AND LINKSYS SRW2048, I AM ABLE TO GET THE CISCO SWITCHES THROUGH TELNET FROM THE CONTROL ROOM IN WHICH WE HAVE LAYER 3 CHASIS SWITCH , BUT I AM UNABLE TO GET THE LINKSYS SWITCH

We have somany vlans and we put some access-list on trunk link for restricting the intervlan communication.but whenever we are going for ip request from DHCP server, we are not able to get that.the communication between DHCP server vlan and all the o...

I have Cisco router 1840 when we login by console cable they display xxxxxxxxxxxxWhets problem

Can anyone give me an explanation of the differences between EEM and GOLD?What is the relationship, if any, between the two?ThanksVictor

Hi,if i connect to the router console i only see hieroglyphics.Is my IOS Image defect?ThanksMartin

Hello!I have Cisco-831.Few days ago was changed dns on isp side and as result i changed it on my cisco-831.After that on lan computers(Lan computers use as dns ip address of internal interface on cisco-831) that are behind cisco 831 started to be pro...