How is the MGT (Not console) port on the 4948 configured?I cannot locate instructions for this in the documentaion for this device.
How is the MGT (Not console) port on the 4948 configured?I cannot locate instructions for this in the documentaion for this device.
Hello all,My company is planning to move into a new building. We will be consolidating different buildings into this one location. Initially we will have 4 floors with 600 users, in the future we will assume 5 more floors and will have 2000 users.We ...
how can i confugure the switch to use rj45 if spf is configured
We installed 5 each 3750 switches using Stackwise and tested the auto upgrade feature. We were unsuccessful using this feature. Our Image file is a .bin file which our SE believes can be used to auto upgrade. The show boot command shows the master ha...
Does the 2960 sw support L3?
I meet a set of access management as follows, does anyone know the use of line 66? Thanksline con 0 stopbits 1line aux 0line 66 (////////// why line 66 required ??) no activation-character no exec transport preferred none transport input all transpo...
Hi. I am having access a router by dial-up (central site) and having access by telnet a remote router. I obtain to enter with the configuration commands and to save, however the connection is blocked when I enter with any command show.What it can be ...
I've a question.I'm having a Cisco Switch, CAT2950, nothing new, but where I have a fan issue, but I only realized about that once I seen the orange red on the status led of the Switch. Checking on the log's, via telnet, I don't find the problem anyw...
Recently got new 3560 and 3750 L3 switches.I compared and contrasted IOS features, and ended up going with latest IOS on both.I gotta tell ya tho - every interface takes noticably longer to come up (using portfast) than I'm used to.Any experience wit...
I am sure this is a pretty dumb question, but I have an 1800 series router, and a PIX. The PIX is configured for PPPoe, and hosts can access the internet fine if their default gateway is the PIX. If I try to put the hosts behind the router they can...
hi guyshere is my senariolan1<-->switch 2960<-->switch 3550<--> switch 2950<-->LAN2i want my 2950 switch , monitor an interface of my 2960 switch..note : that my uplink to each swtich is trunk with 802.1q regards
Hello,I have 2 switches and 1 etherchannel between the 2 switches. VLAN 15 is trunk'd through etherchannel from sw1 to sw2. Now I want to use the VLAN 15 on the second switch. What should I do in order to be able to use the vlan on the second switch....
My 4948 box cannot get past rommon. When Iissue a reset command I get the following:filesystem version 0x10001 is not supported********************** Device Internal Flash Memory needs to be formatted with a newer version of IOSim...
I have problem with this module on my 6506 chassi,the 6506 doesen't recognize WS-X6548-GE-TX.the sup on this chassi is WS-X6K-SUP2-2GE and other modules are: slot1: WS-X6K-SUP2-2GEslot2: Emptyslot3: WS-X6516-GBICslot4: WS-X6516-GBICslot5: WS-X6548-GE...
can someone explain to me how dynamic vlans function on a stack of 3750s? i currently have dell equipment and the vlan assignments time out after 5 minutes and default to native setting. supposedly, the switch will see activity when a computer is in...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-24-2024 02:27 PM | ||
04-19-2024 05:58 AM | ||
04-17-2024 03:50 AM | ||
04-15-2024 06:06 PM | ||
04-12-2024 05:48 AM |
User | Count |
---|---|
11 | |
11 | |
10 | |
9 | |
6 |