Switching

Office is needing a major Overhaul...Currently the office is daisy chained together but we moved the Servers to a Rack and now almost all client machines have about 5 hops to the server approximately..the closest 30 have still got 2 hops minimum.The ...

Hi Which IOS version is better for Cisco 3845 route for BGP and HSRP?Thanksben

hi allcan anebody explain what is the stp & what it's function in vlanthanks in advance

On the 2950 or 3750 I can use sh inv to get serial numbers of installed modules. I need the equivalent for a Catalyst 6500 switch/router.Thanks.

Hi, i tried login with my CCO login to this site for CatOS to IOS converter http://www.cisco.com/cgi-bin/Support/CatCfgConversion/catcfg_xlat.pl but i couldn't. can some 1 lemme know the reason & come across such thingz.

i config static ARP on switch , when host would like to solve the mac address if ip address match , the switch will return the mac-address instead of the destination host right ?Thanks

I have a 6500 with a WS-X6724-SFP blade in it and IOS 12.2(18)SXE3.I need connect a 3750 switch to one of the SFP ports on the blade. This 3750 switch will have PC's and IP phones connected and will have a data and voice vlan.data vlan = 6voice vlan...

I am having some problems with a stack of 3750's I have and connecting a voip phone to a port on them. I have the ports set up correctly and I believe the phone but this is the first time I have connected a voip phone to a 3750 stack. Has anyone done...

Hi, we have the following routes in our load balancer:CSS11501# show ip routes prefix/length next hop if type proto age metric------------------ --------------- ---- ------ -------- ---------- -----------172.16.20.0/24 ...

Hi all, when marking traffic, i know that say if i want to prioritize voice, the phone actually marks the packet itself, if the device does not mark the packet how can i do this ?

Dear Sir, I had a problem on my network. That I had a Cisco device Pix 506 E firewall. This device is connected to my network with Router Cisco 1700 and switch panel 3Com.The Pix 506 E firewall is hang-up always and disconnects all users from the Int...

Where do I go wrong?We have an older Catalyst 2950T in our LAN, which works ok. We need more LAN-connections, so we bought a new Catalyst 2950 and mounted it on the same rack. I cannot get these devices communicate:When either is booted, the other sw...

We have a cisco 3845 router. There are 4 PVDM modules in the router out of which some PVDM's has gone faulty and is not forwarding any traffic.We need to identify the PVDM's which are faulty.Is there any way to check it or do we have to go for checki...

Hi, I have done a bit of reading on the three abbreviations above and still cannot quite wrap my head around what they do and what they are used for. If someone could explain to me what each one does and real life examples of when they would be used ...