Dear all,I have Cisco Switch 2960G one unit. So, when i show interfact gigabitEthernet0/21it show error some point.please find the attach file.Note:now this port don't work.Best Regards,Join
Dear all,I have Cisco Switch 2960G one unit. So, when i show interfact gigabitEthernet0/21it show error some point.please find the attach file.Note:now this port don't work.Best Regards,Join
I'm a bit confused with QoS terms. 3560 Datasheet says this:"Asynchronous data flows upstream and downstream from the end station or on the uplink are easily managed using ingress policing and egress shaping."So when I use policy-maps on the ingress ...
One of our customers wants to move the internal flash cards of their SUP720 (IOS v12.2(33)SRA1)into slot0 for easy access to the flash cards in case of upgrades and changes.Can the switch boot from slot0 without internal flash installed? what happens...
Hi, i am planning to propose the network diagram which is attached to this post, will be using HSRP or GLBP. suggest me if i am wrong some where.
can i connect more than one 2960 switch together and manage it as one switch (one ip number?)
I am looking for a GUI for the 6509-E similar to SDM and ASDM.
What am i missing. On port 5/1 - 5/2 I try doing a no shut on the int's but it still shows as admin down.Thanks
I just setup my Cisco 851 router for my home network. Things are working. I would now like to setup a few access lists, but need some help. I would like the following.1. Log all SSH connections.2. Deny SSH connections from the outside.3. Permit/allow...
Hello. Is it possible to have the following entry in a nat config using pools?ip nat pool ras 199.43.3.207 199.43.3.207 prefix-length 24ip nat inside source list 101 pool ras overloadaccess-list 101 deny ip 199.43.3.206 host 198.20.10.121 logaccess-l...
In Cisco IOS on a switch you can do a 'monitor session.....'. There are options for spanning and monitoring a port's traffic or the traffic from a VLAN. Obviously the main difference is that one allows the ability to see all VLAN traffic for a part...
I'm trying to switch my Music on Hold streams from Unicast to Multicast, and am hitting some snag when enabling multicast on the network. The core of the network consists of 4 6500 switches, 2 as core, 2 for servers. All are Native mode with SUP720...
We have a 6513 with Sup720-3BXL. Currently it takes default route from our ISP. The average CPU utilization is 10%. The peak is around 20%. We are thinking to take full route from the ISP. Anyone have experience about this? Thanks a lot.
Guys,i am in a bit of trouble - CPU utilization for a 4507r is around 90% and show platform health, showsK2FibFlowCache flow 2.00 44.91 10 8 100 500 66 55 32 576:09it means something wrong with PBR Cache Management, i tried remov...
what is main difference between 3560 and 3560E switches?
ok I just invested on some cisco equiphere is what I have 3 x 261012 port 2900 xl24 port 2900 xl2511 access server2501 I would like to access all the swithces and router w/ out removing the cable using the access server 2511 .. can I do that ? or I ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-24-2024 02:27 PM | ||
04-23-2024 02:53 AM | ||
04-19-2024 05:58 AM | ||
04-17-2024 03:50 AM | ||
04-15-2024 06:06 PM |
User | Count |
---|---|
12 | |
10 | |
10 | |
9 | |
6 |