Switching

Hi Plz Chk the Network Diagarm attached for ur reference and Suggest solutionI am facing problem thai is OF LOOP.This is our requriemt to connect real IP with private IPs.. becoz there is requirment.PLz how can i deal this thing via use c-2950.. shou...

we have a 6509 with Supervisor2 and msfc2 (2 running in high availability mode) one of the msfc cards has failed and the replacement has an older version of code. because we cannot write any config to the new one (any vlan interfaces go down down due...

I have a catalyst 3560G with 3 vlans(Vlan1,Vlan2 and vlan3)and also one trunk port for vlan2 and vlan3.My question is how can i make a routing (Traffic exhange)between Vlan1 and vlan2?

Hello,I am curious to know if there are ANY differences between the IGMP routing/snooping capabilities between the 3560, 3750 and 4948 switches. Any links, pointers, advice would be much appreciated.--Mike

Hi,Part of my security cameras are on my IP network. The camera a sending a unicast flow to the archiving server and a multicast flow for the real time viewer.Problem is overtime, multicast entry is deleted from the RP source table. In this case, the...

4402 Wireless Controller (p1 to 24P G0/2) 3560- 24 port POE (G0/1 to 48P G0/2) 3560-48Port (G0/1 to 1841 F0/0) Cisco 1841 router (F0/1 to core net) The 4402 uses 3 dot1q vlans. I want to use the 1841 to route between the vlans as the 1841 has a firew...

I have a Catalyst 6509 Switch installed in our network. We have following modules installed on the switch which is acting as an uplink modules for the switches in the closets or IDF's.16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC 6 S...

hi I am confused in configuring fast ethernet in the 2600 series router ,can you give exact command path for configuring ?

i am unable recover the password in switch and router,can you give exact command path to recover the password ?

reset a password in 2924 xl switch .facing problem to reset the password.

We have (2) Cerent 15454 boxes. We are trying to create SDCC for visiblity from one box to another in the event we lose visibilty. This will be via OC12's we have on each box. The SDCC connection is setup however when the LAN cable is pulled we get a...