Hi.
I have a Cisco 871 router with this network schema
10.218.10.117 Host ---------------------10.218.10.118 FE4 || CISCO 871 || 172.18.122.5 FE0----------------------------------172.18.122.6 Host
I want the 172.18.122.6 host can do ping to the 10.218.10.117 Host at other end of the router but its not working, what is wrong with this config? could someone give me a hand?
Using 1222 out of 131072 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ALCATE-CNT-UIO
!
boot-start-marker
boot-end-marker
!
enable secret 5 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
enable password XXXXXXXXXXXXXXX
!
no aaa new-model
!
resource policy
!
ip subnet-zero
ip cef
!
!
!
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
ip address 10.218.10.118 255.255.255.252
speed auto
full-duplex
!
interface Vlan1
ip address 172.18.122.5 255.255.255.0
!
router rip
redistribute connected
network 10.0.0.0
network 172.18.0.0
!
ip classless
!
!
no ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
!
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
password XXXXXXXXXXXX
login
!
scheduler max-task-time 5000
end
Best regard
Jeff
