Hello All Friends,
I'm trying to do a configuration on Cisco Aironet 1200 series wireless Device and I'm having some difficulties. I have Cisco Aironet Wi-Fi Device, and am trying to configure with two SSID,
One is for DATA & another is for VOICE Triffic, I have two VLAN, one for each SSID, but I Can show only ssid Coinop, If i tried to enable guest-mode on SSID Voice-Coinop then i got error: Guest-ssid already existing on ssid Coinop
I need to Access SSID Voice-Coinop for connecting Wi-Fi Cisco IP Phone.
I request to All Experts Please help me on this issue.
Thanks
Vikrant
sh run
Building configuration...
Current configuration : 2382 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname CiscoAPWiFI
!
enable secret 5 XXXXXXXXXXXXXXXXXXX
!
ip subnet-zero
!
!
no aaa new-model
dot11 vlan-name Data vlan 1
dot11 vlan-name VOIP vlan 100
!
dot11 ssid Coinop
vlan 1
max-associations 25
authentication open
authentication key-management wpa
guest-mode
mbssid guest-mode dtim-period 1
wpa-psk ascii 7 15425F5D557A7D7D7C6762
!
dot11 ssid Voice-Coinop
vlan 100
authentication open
authentication key-management wpa
mbssid guest-mode dtim-period 1
wpa-psk ascii 7 06565B701D1E5F40514345
!
dot11 network-map
!
!
username XXXXXXXXXXX password 7 XXXXXXXXXXXX
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers tkip
!
encryption vlan 1 mode ciphers tkip
!
encryption vlan 100 mode ciphers tkip
!
ssid Coinop
!
ssid Voice-Coinop
!
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root access-point
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio0.100
encapsulation dot1Q 100
no ip route-cache
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
bridge-group 100 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
hold-queue 160 in
!
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface FastEthernet0.100
encapsulation dot1Q 100
no ip route-cache
bridge-group 100
no bridge-group 100 source-learning
bridge-group 100 spanning-disabled
!
interface BVI1
ip address 192.168.8.254 255.255.255.0
no ip route-cache
!
ip default-gateway 192.168.8.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end
|
