07-08-2009 05:30 AM - edited 03-06-2019 06:38 AM
sh interfaces switchport
On my access ports I see the following:
Access Mode VLAN: 96 (switch name)
Trunking Native Mode VLAN: 1 (default)
Now the trunk port shows the following:
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 50 (NATIVE_VLAN)
Do I have a misconfiguration on the access ports or is this the way it should display?
Solved! Go to Solution.
07-08-2009 06:03 AM
Hello Jason,
>> Do I have a misconfiguration on the access ports or is this the way it should display?
the access port is in vlan 96 and has native vlan 1 if it were a trunk.
the trunk port has native vlan 50 and if the mode would be access it would be in vlan1 (default).
All this looks like possible and correct
Hope to help
Giuseppe
07-08-2009 06:03 AM
Hello Jason,
>> Do I have a misconfiguration on the access ports or is this the way it should display?
the access port is in vlan 96 and has native vlan 1 if it were a trunk.
the trunk port has native vlan 50 and if the mode would be access it would be in vlan1 (default).
All this looks like possible and correct
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide