Hi; I have recently bought a brand new NM-32A module to use in my lab and installed it on a cisco 3745 router . I can not get the lines Async on it. Do you have any configuration example that I can use please. ?
Here is the copy of the config I have typed on it.
Current configuration : 1227 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname DMVPN/ACCESS-server ! boot-start-marker boot-end-marker ! enable secret 5 $1$NGTF$FiVS9ptetakrkKj/3mgFi1 enable password class ip subnet-zero ip domain-list cisco.com no ip domain-lookup username admin password 0 cisco no aaa new-model ip subnet-zero no ip domain lookup ip host R1 2001 10.0.0.1 ip host R2 2002 10.0.0.1 ip host r3 2003 10.0.0.1 ip host r4 2004 10.0.0.1 ip host r5 2005 10.0.0.1 ip host r6 2006 10.0.0.1 ip host r7 2007 10.0.0.1 ip host r8 2008 10.0.0.1 ip host R9 2009 10.0.0.1 ip host R10 2010 10.0.0.1 ip host R11 2011 10.0.0.1 ip host R12 2012 10.0.0.1 ip host R13 2013 10.0.0.1 ip host R14 2014 10.0.0.1 ip host R15 2015 10.0.0.1 ip host R16 2016 10.0.0.1 ip host R17 2017 10.0.0.1 ip host R18 2018 10.0.0.1 ip host R19 2019 10.0.0.1 ip host R20 2020 10.0.0.1 ip host SW-3650-1 2021 10.0.0.1 ip host SW-3650-2 2022 10.0.0.1 ip host SW-3650-3 2023 10.0.0.1 ip host SW-3650-1 2024 10.0.0.1 ip host SW-3750-1 2025 10.0.0.1 ip host SW-3750-2 2026 10.0.0.1 ip host SW-E-1 2027 10.0.0.1 ip host SW-E-2 2028 10.0.0.1 ip host ASA-1 2029 10.0.0.1 ip host ASA-2 2030 10.0.0.1 ip host LAN-SW-2031 10.0.0.1 ip host WLC-4400 2032 10.0.0.1 ! ! ! interface Loopback0 ip address 10.0.0.1 255.255.255.255 ! interface fa 0/0 ip address 192.168.0.251 255.255.255.0 no shut ! interface Serial0 no ip address shutdown ! interface Serial1 no ip address shutdown ! ip default-gateway 192.168.0.1 ip http server ip classless
The image used is :
DMVPN/ACCESS-server>en Password: DMVPN/ACCESS-server#sh ver Cisco IOS Software, 3700 Software (C3745-ADVENTERPRISEK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Wed 18-Aug-10 08:18 by prod_rel_team
ROM: System Bootstrap, Version 12.3(6r) [cmong 6r], RELEASE SOFTWARE (fc1)
DMVPN/ACCESS-server uptime is 2 hours, 23 minutes System returned to ROM by reload System image file is "flash:c3745-adventerprisek9-mz.124-25d.bin"
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to firstname.lastname@example.org.
Cisco 3745 (R7000) processor (revision 2.0) with 243712K/18432K bytes of memory. Processor board ID FCZ0936721R R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2, 2048KB L3 Cache 2 FastEthernet interfaces 6 Serial(sync/async) interfaces 4294967174 terminal lines DRAM configuration is 64 bits wide with parity disabled. 151K bytes of NVRAM. 62720K bytes of ATA System CompactFlash (Read/Write)
How to complete the RMA order.
How to complete the RMA order initiated by Cisco TAC engineer.
Once the RMA is initiated by the TAC engineer.
Customer will receive an email with the link to complete the order.
Click on the link provided i...
How to complete the RMA order.
Introduction to Essential Utility for Optical Network Professionals
This utility will serve as ready-made handy calculator/c...
There are few interoperability issues between 2960x and other vendors. In this article we will go over the steps on how to debug these issues.
Check the phy id from “show controllers ethernet-controller phy” output.
<snip from show controllers ethe...