Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to request missing Visio stencils?

There are several Visio stencils that are missing from the library that I need. They're important to me (and I imagine others want them too) as I need to do rack elevation diagrams. I hate to open a TAC case on them but not sure what else to do. Any thoughts?

The stencils I require are:

ASA5510 (Rear view - the side with the interfaces)

ME-C6524GT-8S (Rear view - the side with the power supplies) - 24 Ethernet - 10/100/1000 interfaces + 8 Gigabit Ethernet SFP uplinks, 1 fan tray

PWR-400W-AC - 400W AC power supply for the Cisco ME 6524

PWR-400W-DC - 400W DC power supply for the Cisco ME 6524

ME-C3750-24TE-M (Rear View - the side with the power supplies) - Cisco Catalyst 3750 Metro

PWR-ME3750-AC - Cisco Catalyst 3750 Metro Switch Primary AC power supply

PWR-ME3750-DC - Cisco Catalyst 3750 Metro Switch Primary AC power supply

Cheers

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to request missing Visio stencils?

Hi Gary,

I requested funding for the rear views but the product group approved only the front views.  If you would like to post a justification I will forward it to them to see if they will reconsider.  Customer input is always taken seriously and I can be more effective with that kind of backup from the field.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

200 REPLIES
New Member

Re: How to request missing Visio stencils?

Your request for Visio images of these specific Cisco har

dware products will be forwarded to the individual product owners requesting they sponsor

creation of Visio images.

New Member

Re: How to request missing Visio stencils?

Beverly,

Thanks for the prompt response. I know this will be a difficult question to answer, but do you have any idea how long this process typically takes? Weeks? Months? Years? Also, is the request likely to be granted or is there a great deal of justification that must be done internally at Cisco to get Visio stencils created?

New Member

Re: How to request missing Visio stencils?

Gary,

Unfortunately I can not guarantee exactly how long it will take to create all of these Visio images.  We are searching for the product owners of each to request they sponsor creation of the Visio.  We will do our best to have them posted within a months time.

New Member

How to request missing Visio stencils?

Hello Beverly,

Any update on the stencils for the 6524 ME series switches?  I am actually in need of the ME-C6524GS-8S.

Thank you,

Jennifer

Re: How to request missing Visio stencils?

Hi Jennifer,

My company handles Cisco's Visio stencil production.  The C6524GS-8S is on the Switches-ME Series stencil posted at http://www.cisco.com/en/US/products/hw/prod_cat_visios.html.  It's been there since April 13 of this year so if you haven't recently downloaded that stencil, please do so and you should find it there.  If not, please let me know at brettn@visimation.com so I can troubleshoot the problem, but I just checked it to verify.

Regards,

Brett Newman

Cisco Visio Development

Visimation Inc.

www.shapesource.com

New Member

Re: How to request missing Visio stencils?

Thanks Brett, I found them!

Jennifer Berquist

AT&T Labs

813-402-5222

jyoung9@att.com

New Member

How to request missing Visio stencils?

Brett,

I found the stencils very useful.  I needed, in particular, the 3750x and found it here:

http://www.cisco.com/en/US/prod/assets/visio/product_visio_icon0900aecd8009b2de.zip.

It includes excellent rear views, with connetion points on the Ethernet and stacking ports.  It also shows only one power supply and a blank cover on the space where the second one would go.

I was hoping to find a redundant power supply in the stencil that I could snap in on the switch, but there is none.  Is it available?

Thanks,

Bruce

New Member

How to request missing Visio stencils?

Bruce,

Thank you for your positive responses after finding the Cisco product shape you were looking for. I will advise our Visio production staff (Bret) of you request so an internal sponsor can be advised of your request and approve creation of this shape.

New Member

Re: How to request missing Visio stencils?

Thanks.

Bruce

Cell: 678.982.8335

Office: 404.573.5959

Hughes Telematics, Sys Ops<>

New Member

How to request missing Visio stencils?

Hello,

We need you help for a Cisco ASA 5505 visio template

thank you

New Member

How to request missing Visio stencils?

try this one, its got the 5505

http://www.cisco.com/en/US/prod/assets/visio/products_visio_icon0900aecd8050a7d7.zip

@PivotalPete "The only stupid question is the one you don't Ask." - A uni lecturer I had once Check Out our offerings at: http://www.pivotalnetworks.co.uk
New Member

Re: How to request missing Visio stencils?

Dear Beverly,

Please also include the options modules for the 3750x switches:

<>

Thanks,

Bruce

Cell: 678.982.8335

Office: 404.573.5959

Hughes Telematics, Sys Ops<>

Re: How to request missing Visio stencils?

Hi Bruce,

I just wanted you to know that your request is being worked on.  We've had a high volume of Visiio production requests at Cisco the past several months so our delivery time is longer than I'd like so I apologize for that.  I expect the Catalyst 3750x shapes done within the next two weeks. Feel free to contact me directly brettn@visimation.com if you have any specific input.

Regards,

Brett

New Member

How to request missing Visio stencils?

Hello,

I've found pretty much everything I was looking for so far, but i'm missing those: Catalyst 4500 Series module WS-X4612-SFP-E, WLC-5508 Wireless Controller, Aironet Access point 1040, 1130, 1260, and Catalyst 3560 WS-C3560-12-PC-S.

Is there a way for me to get access to those Visio stencils?


Thanks in advance,

Philip

Re: How to request missing Visio stencils?

Hi Philip,

We are actually just about done with a set of additional Wireless Visio shapes.  This includes the 1040, 1260, 1140, and WLC 5508.  We did not have the 1130 on our list but we can add that as well.  These will be available shortly.

I will approach the product groups about the 3560-12-PC-S and WS-X4612-SFP-E.

Regards,

Brett Newman

Visimation Inc.

Hall of Fame Super Red

How to request missing Visio stencils?

Hey Brett,

Just wanted to say thanks for your great participation here! I'm just

curious if there is an actual "formal" method for requesting new

Visio stencils or are you OK with just posting up our requests here?

Cheers! And thanks again.

Rob

How to request missing Visio stencils?

Hi Rob,

You are quite welcome... it's my pleasure to answer these questions and I'm pleased it's helpful.

There is a formal process for internal Cisco groups to request Visio stencil for their products.  However, there is no formal process for customers other than this forum.  When requests have been posted here, I've been passing them on to the product managers for approval since they must fund the Visio development.  Then, we have a prucurement process that kicks in.

Please understand that sometimes this takes a while to get from a forum request to a Visio stencil due to the approvals and the ordering process that we must comply with.

Since this seems to be a good place for this discussion, I will do my best to post an announcement here when a stencil has been added or updated on the Visio stencil library page:

http://www.cisco.com/en/US/products/hw/prod_cat_visios.html

Regards,

Brett

Hall of Fame Super Red

How to request missing Visio stencils?

Hi Brett,

This is great news! Thanks again for this outstanding support

Cheers!

Rob

New Member

Hello,I am searching about WS

Hello,

I am searching about WS-C3560E-24TD-S stencil. Does anyone have it ? I know that these switches are end of life but i need the stencil.

Thank you

Regards

Hi,Unfortunately that shape

Hi,

Unfortunately that shape was never produced and the product group will not fund new shapes for end of life products. I wish I could be more helpful.

Regards,

Brett Newman

Cisco Visio Development

Visimation Inc.

www.shapesource.com

New Member

Brett, Is it possible to get

Brett,

 

Is it possible to get front and rear of the 881 and 887? You already have the 4G versions of the 881 and it shouldn't be too hard to get the regular 881.

 

Thanks!

Hi Gary,The 881 is in the

Hi Gary,

The 881 is in the current ISR 800 Visio file. The 887 is end of life so the product group won't fund a shape for that product. Sorry...

Regards,

Brett Newman

Cisco Visio Development

Visimation Inc.

www.shapesource.com

New Member

Brett, Any chance we can get

Brett,

 

Any chance we can get Visio's for the ISR 4000 Series Routers?  Specifically the 4331.  Also need the NIM modules for this model: NIM-4FXO, NIM-2FXO, NIM-4FXS, NIM-2FXS, SM-X-NIM-ADPTR, NIM-2MFT-T1/E1, and NIM-4MFT-T1/E1.

Finally, looking for the VG310.

Thank you in advance,

Corey.

Hi Corey,There is a pending

Hi Corey,

There is a pending project in the pipeline for all of the items you listed except the VG310 which is from another product group. I expect the ISR 4000 updates to be available within about 3 weeks. We are waiting for final budget approval before proceeding. I've also just emailed the group responsible for the VG310 to ask if they can support Visio production for their products. I can't predict how long that might take.

Regards,

Brett Newman
Cisco Visio Development
Visimation Inc.
www.shapesource.com

New Member

Brett,I was just out on the

Brett,

I was just out on the download site and do not see these yet.  I was just wondering if they got held up or why they would not be on the site yet.

 

Thank you in advance,

Corey W.

Hi Corey,Yes, they did get

Hi Corey,

Yes, they did get held up... still waiting for funding approval.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

New Member

Brett, Is there anyway that

Brett,

 

Is there anyway that you can get a visio stencil made for the Cisco Nexus 93120TX switch (N9K-C93120TX). It is currently not in the Switches-Cisco Nexus 9000 group.

Thank You in advance,

Jared

Hi Jared,I've put in a

Hi Jared,

I've put in a request for this to the product group. Hopefully it will be approved for funding.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

New Member

Hi Brett, I wanted to ask if

Hi Brett, I wanted to ask if there is any way to get an update to the IP phones Visio to include 3900, 8800, 8900, and 9900 series phones? I would love to be able to use them on customer documentation.

 

Thanks in advance,

Nicholas

39202
Views
14
Helpful
200
Replies