Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I've looked at the latest Security-Cisco ASA 55xx stencils on Cisco's website dated Feb 2012 (http://www.cisco.com/en/US/products/hw/prod_cat_visios.html) and they still don't have stencils for the ASA5525, ASA5545 and ASA 5555.  When can those be ready?

21 REPLIES

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi David,

I'm sorry for the delay... I somehow missed this posting.

I will check with the product group for approval to produce these.

Regards,

Brett Newman

Cisco Visio Development

Visimation Inc.

www.shapesource.com

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi Brett,

Do you have an update of this. I need the Visio Stencils for ASA 5525.

Thank you.

Julio Ulloa

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi Julio,

I have been trying for months to get the attention of the product group to authorize us to create thise icons.  Usually this is not a problem but for some reason I have not gotten a resonse from the ASA group.  I'm very sorry but I'll keep trying.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I need these as well!

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi Paul,

Sadly I've still received no response and I am trying again today.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I would also be very interested in these visio stencils

Thanks

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I too would like these templates

Thanks

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I've been looking for these as well.  Brett, any update as to when these might be available? I need the 5500x series icons.

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi,

I haven't replied for several weeks due to some personal matters so please forgive me.  I have just identified another contact in this product group that I'm hoping will be able to help get these shapes approved for development.  I'm sorry this has been such a long process but we must wait for formal approval from the product groups before we can proceed with any Visio work. 

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi Brett,

Has there been any progress with this?

Perhaps if you can supply us with a contact within Cisco who can deal with complaints then we can get this expedited?

Thanks

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi,

Believe me, I could use a nudge from the field but I'm prohibited from posting email addresses for product managers in these forums and there is no one to complain to other than me. I've simply got to be a squaky wheel until it works.  I will forward your post as well.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I could use these too.  Any updates?

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi,

The work order is in process but we don't yet have formal approval to proceed.  We will do our best to get these done ASAP but we must wait for approval.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

+1 on the need for these icons.

Thanks,

Dave

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I know this has been a long haul and we appreciate everyone's patience.  An update to the Visio download for the ASA 55xx has been posted and it contains new icons for the 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hello Brett,

I just downloaded the ASA55xx stencil updated May 6th, 2013.  I do not see any X series ASAs in it this file.  Would you be able to share the new x-series ASA visio stencils with us?

Kyle

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi Kyle,

We did produce the X series products back in May and I just downloaded the file from the Visio page to verify that they are there. I see the 5512-X, 5515-X, 5525-X, 5545-X, 5555-X, and 5585-X. Is there something else that's missing?

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Brett,

Thank you for your reply.  I had downloaded and used the ASA-55xx from the "All Visio Products" download.  I just downloaded it again by itself with Chrome and everything is there.

Kyle

New Member

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hello,

I also had some problems, this was the path taken;

> http://www.cisco.com/en/US/products/hw/prod_cat_visios.html

> All Visio Products

> product_visio_icon0900aecd80095127.zip

> Security-Cisco ASA 55xx_04.13.11.zip

These did not include the X series.

This however does;

http://www.cisco.com/en/US/prod/assets/visio/products_visio_icon0900aecd8050a7d7.zip

Cheers,

James.

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

Hi James,

Thank you for pointing this out.  I have been mentioning in multiple posts that the All Product file is not up to date because we are having challenges with its size.  The best place to find the most current shapes is in the individual links to the product you need on http://www.cisco.com/en/US/products/hw/prod_cat_visios.html.

Regards,

Brett Newman

Cisco Visio Production

Visimation Inc.

www.shapesource.com

hi james,this link helped me.

hi james,

this link helped me. thanks!

16387
Views
0
Helpful
21
Replies