TelePresence and Video Infrastructure

Could some body tell me 3rd party webcams that could be supported by VT Advantage and Cisco Video conferencing?Thank you a lot!

Help me pls,i just installed Unified Video Advantage and everything fine except i cant perform audio calls to internal pbx numbers while Unified Video Advatage running, for example to number 3119, at the same time I can perform calls to ip phones. If...

Will the 6900 series work with CUCM 6.1? I am having a hard time finding this information on Cisco website... Big surprise! :D I got a quote from one of my vendors and they were saying that you need CUCM 7.1.2. Thanks for the help!

Hi,I have setup as below;CME--> H323 --> IPIPGW --> SIP --> CCMWhen i initial a call from CME phone to CCM phone, the phone at CME just keep on ring out even when the phone at CCM side pick up, my dial-peer config as below;CMEdial-peer voice 100 voip...

I recently had a friend that's an audio engineer come in and record someone for our main greeting. What format do I need him to convert it to?He tried using quicktime on his mac to convert it to G.711 ulaw 8khz mono (which somehow come out as an .au...

Does anyone know of any information anywhere's about streaming video from the new IP cams, specifically the CIVS-IPC-4500 HD cams, into VLC?Any help much appreciated.

Here is link http://www.cisco.com/en/US/prod/collateral/video/ps7190/ps5662/product_data_sheet0900aecd8044de04.htmlAs I see , I can use USB camera and soft to test Video over IP.I have some question:1)Do I need some license to test Cisco Video Advant...

Hi,I am putting in a CUBE in a DMZ that will have a public address that will NAT to it's internal address.First off, what scenario is the CUBE really used for? Does it make since to have an outside IP Video Station register to the CUBE using the publ...

How to perform a CTS Codec software upgrade? In CLI I see commands for switching between slot 1, slot 2 and factory images, but how do I upload the software in these partitions?

Hi,does anybody expirience problems with VoD unicast packets on Cisco 2960 or 3750? I have situation where I have 2960 lanlite access switches where all IPTV devices are connected. No other devices sharing switch with IPTV devices. 2960s are connecte...

Want to check to see if MPX VT can do this. Want to have a video conference where the presenter will see all of the participants but the remote people will just see the presenter. I see in the documentation that in a video conference, the default s...

Hi,Im trying to configure power over Ethernet for my cisco ip phone. My switch is 3750.framedrelay(config-if)#power inline ? auto Automatically detect and power inline devices never Never apply inline powerframedrelay(config-if)#power inline a...

I have a problem when configuring the CCM 7.1.2 with ISR 2811 as a MGCP gateway to PSTN.I got errors on "debug mgcp error"Sep 2 19:34:27.645: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x485E8038 pkt->mgcp_parm_...