TelePresence and Video Infrastructure

Hi all, advice greatly appreciated. With a CME solution can we use a Cisco Unified IP Phone 7985G at central site and the same at a remote office at the other end of the country connected via vpn to provide video conferencing facility? If so what wou...

Hi!I need a solution to use the PAI or the RemoteParty from SIP to ISDN. The only things i have fount is from PSTN to SIP to set a fixed PAI (Official Cisco IOS SIP Config Guide for 12.4T)Example of Call-Routing:Softphone with username dials pstn-num...

Hi All, we have SIP service provider for our CME. some incoming calls to CME are one way audio but some work fine. I did "show voip rtp connection", and in the one way audio call, I saw CME chose the loopback interface as source RTP stream, which has...

Dear All,I have DMM version 5.0.2 that controlled about 35 DMP's over WAN and the DMP's displayed design contains one Video play list and two none video play lists ,the non video play lists integrated with two applications .my issue is in last Wednes...

we are using cisco call manager 5.1 , but cisco 7985G is able to deliver video, please help us out

hi Shall we use our builtin laptop camera as an endpoint for video conferencing. Will it work properly in CUCM. krishna.

Hi Guys,I have an AIM-CUE on Cisco 2821 Router when i attempt to pen a session with service engine 0/1 i have on console : waiting. Causing the end users to be unable to listen their voice mails.Do you have an idea about that ?Thanks

Hello, we have two radius servers <Radius_1_PUBLIC_IP> and <Radius_2_PUBLIC_IP> When the first shuts down, the AS5300 Gateway does not change to the backup server.aaa group server radius H323-calls server <Radius_1_PUBLIC_IP> auth-port 1812 acct-port...

Dears, i have CME 3.2,i need the phone load for cp7912.Thanks,

is is possible to have the router (2851, advipservicesk9-mz.124-24.T, Cisco Unity Express 7.0.1) encrypt the password used for the CUE web login so that it is not displayed in plain text? Service password-encryption is set on the 2851.Thanks! Stev...

Has anyone heard of or experienced 4CIF video leaving an ATM interface on a Cisco 3660 (12.3(6a)) and at the next hop ATM switch seeing CRC errors, causing packet loss and bad video at the far end video unit? If the video is switched to CIF resolutio...

Hello,I am having a small problem with our Cisco 5400 device, I have 5 T1 lines from Verizon all in a nfan group for some reason i am getting the following error: disc subsys=ISDN, disc code=0x29, disc text=Temporary failureon the call log, i have lo...

Hi Can any body explain the difference between the L2 QOS and L3 QOS. is it L2 is COS and L3 is IP PRCEDENCE and DSCP. pls explainregardsEsa