TelePresence and Video Infrastructure

Hello,My Gateway do not register to my GK, what can be done ? (Netmeeting registers)Here is my config:On GWh323-gateway voip interfaceh323-gateway voip id gk.domain ipaddr 1.1.1.1h323-gateway voip h323-id gw.domainh323-gateway voip tech-prefix 2#On G...

Is it possible to block prefixes on the gw?I am interesting in blocking prefixes in two direction:calls coming from PSTN into VoIP network and from VoIP into PSTN.Is it possible?

Hi,I'm using cisco as5300 and channel bank for voip (terminate).when voip call leg recieved to my gateway and used DS0 number 10 of 30 , the voice conversation is one way (don't have ReceiveBytes) but when used other DS0 channel,gateway normaly work!...

Hi,I want configure jitter buffer for adaptive modecan you advise me , how to specify best value for nominal and maximum delay?is there facility for specify these values?Thank youMehrdad.A.R

Anyone know how to remove zone commands? I've found using the 'no' command does not work as in a router. The 'no' command seems to mean reverse the intention of the associated command, and doesn't remove the command from the config.If I want to remov...

Hi, I am trialling IP/TV 3.2 demo version on our University campus network, which has a Catalyst 5500 and RSM as core router/switch feeding other buildings via Gbps Ethernet and is configured to support multicast and Cisco CGMP. I am multicasting MPE...

I was thinking of setting up a VoIP system using my VSAT connection. But the problem was, the VSAT system only works with TDMA enabled VoIP gateways.Can you please help me out on what VoIP gateways that will work with my VSAT connection, am thinking ...

HiCould you please tell me , % at translation rulewhat dose it mean? for example :translation-rule 20 Rule 0 ^90.% 9 Thank youMehrdad

I would like to reduce the amount of dial peers in my AS5300's on Pots dial-peers. Currently I am using preferences to send calls to the next span once one is full. Is it possible to Group Trunks other than the DS0(1-24/1-31 ) method that only take...

Hi,I need to find a way to modify the digits in a voip dial peer. Want I need is to be able to add numbers to the beginning of the string sort of like the prefix command in a pots dial peer.Any ideas?

Is there a default logon username and password required when you first start the CM software up on a IPTV Content Manager server.If not can you retrieve the existing logon username and password from somewhere ?.Thanks

Could someone confirm for me the following;How many capture cards for live streaming can be installed in the following broadcast servers at the same time.Cisco 3424Cisco 3425Is it a max of one in each ? or can additional be added ?

Hi everybodyDo you now how can I see for all calls duration and which number was called from which phone?Thanks in advance

Hi,I've seen on the NET and on CCO some references about Cisco Video Network 2900 solution... but i can't get more info on this...Anybody has more info on this. Is this product in End Of Sales ??? thanks

Hi,We are using VoFR between two Cisco 2610 using FXO\FXS Cards. It is a point-point link with two PVCs, one for Voice and one for Data.I have implemented Traffic-Shaping and FRF. However when i do a "show frame pvc " command, i can see "frags delaye...