Hi All, I'm looking to implement GetConferencesForSystems (TMSBooking Service) in such a way that I can get the conference participants with the conferences. Currently when I pass in say 3 system IDs I can get the conferences they belong to, but ...
Hi All, I'm looking to implement GetConferencesForSystems (TMSBooking Service) in such a way that I can get the conference participants with the conferences. Currently when I pass in say 3 system IDs I can get the conferences they belong to, but ...
Hi everybody, is there a way to configure session timeout (as for web accesses, via browser) for TS (v4.4)? i've looked for it through Cisco documentation but i was able to find out only the "serial console session timeout". Thanks, Gianluca
I am looking to use the touch 10 to control a multi zone amplifier. I have access to most brands.
Hello Team , Can someone clarify how should I proceed with the migration process I understand I can take a backup/restore, but it requires the Option Keys to be the same on the UCS server. My question is how the Option Keys are going to be ready for ...
Hey guys, We have just deployed a TMS 15.5, and we are trying to add 2 CUCM clusters into it. The CUCM 10.5.1 were added in with no issues, but when trying to add in CUCM 9.1.2, it was added but with a no https response error. Any idea why there is...
Which licenses (part number) should I purchase to activate cisco 7821 phones in CUCM 11.0.1?
Hi, Anyone please suggest is it possible to call from a Skype account to cisco sx20?If possible then please tell me the process. ThanksDebu
Hello, We have a Cisco SX20 in a conference room. Is it possible and how to make and receive calls from SX20 to Skype for business accounts or from Skype for business to Cisco SX20? Thanks! Dimitris
Hi Community, We have CUCM version 11.0.1 and connected using SIP trunk with Expressway Core X8.8.2. On the CUCM SIP trunk status, its showing No Service. We are using port 5560 for the SIP trunk with Expressway Core and the SIP status on the Neig...
I have an issue with MX800 and iPhone presentation. It doesn't work. Connected as below HDMI port of MX800 - Extender device - Cable(10m) - HDMI with lightning cable - iPhone6 It showing black screen only. When I connected my windows PC or direct c...
In one of our conference rooms (small huddle room; 4 chairs) we are using a DX70 as a telepresence endpoint with the Android firmware and using the HDMI out to project to a 55" TV. We have gotten the push from administration to switch the room to C...
Does anyone know how to disable the PC port on the DX70, and DX80 that are registered to the VCS and not the CUCM ?? I can't find it in the browser when logged in or in SSH. VR Chet
hello I've format flash of this equipement, actually need load the reléase but I have problema %Error opening tftp://255.255.255.255/ap1g3-k9w7-tar.default (connection timed out)
Have a edge 95 with HD camera ... Problem is I can't drive thru menus using the remote TRC4. Camera LED blinks when pressing buttons on remote but nothing happens on the monitor menu's ?? Also the main camera not selected and no video transmit when c...
I read that MX and EX end points have an MCU embded. Is that mean that we can use video conferencing without CMD or CUCM ? Thank you,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 08:22 AM | ||
04-25-2024 05:00 PM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM |