TelePresence and Video Infrastructure

Hi Folks We are going to upgrade our VCS Control and Expressway on the software version to X7.2.2  from X6.0.When we go the cisco software download site we found that there are two software X7.2.2 with AES encryted and Non AES encrypted.What is the d...

 Hello,I am very new to telepresence ISDN Link, i want to setup for the on of the client who wants to call through BRI to another country,we have a CTS SX20 and TP ISDN Link,Please anybody can route me to the configuration example of this device. Tha...

DearVery New to Telepresence,i have connected a SX20 in 4 Places for example Location A,B,C,D, am i m in bad situation scrathing my head where the problem is lying.Now the situation is,Everybody (B,C,D) can communicate with location A ---no issuesloc...

Hi Team, Is TMS can be used to schedule meeting with Expressway C&E. I have heard its not support with current version of TMS.Please share your thoughts. Thanks,Ashraf

dear all,can any one explain how to configure IP Phone and Call manager?In which scenario it needed?what are the basic thing to configure both IP phone and call manager? regards,kabeer

With the newest version of Cisco TP Conductor XC2.2.1 looking through the options of the Xconfiguration and Xstatus SSH and/or API commands, there seems that options to configure conference bridges, conference bridge pools, conference templates, alia...

Hello, I have a mixed environment of 6000MXP's and C40's with a 4515 MCU.  When I send content from the C40 I get a max content resolution of w288p (512x288).  The content source is a PC connected to the C40's HDMI input  with a resolution of 1920x10...

Is there a way on the Codian 4520 for adhoc conference to display content fuill screen to all all participants in the meeting when content is being shared?Also when confernce is not being shared want to go back to the 2x2 or 4x4 screen for video

Hi,We have encountered problem on layout of C60 endpoint running TC6.0 when connecting on MCU.On the MCU conference layout we use 1 + 3 video layout (pane 1 for content and panes 2,3,4 for participants). The problem is, when the C60 endpoint will do ...

Hello all.I hope one of you can help me.I am running VCS X7.1The CUCM was running 8.5 and I had video calls working from VCS to Jabber for Windows.Then we upgraded CUCM to 9.1.Now, I can only answer the call on my 7945 (no video phone) and get voice ...

When accessing the codec C40 via the command line interface (telnet or ssh) as admin user, it accesses on maintenance mode by Cisco Telepresence Maintenance Mode as the attached file so i need to solve this issue.please advice  

Hey all,After a webcast the other day on the Cisco Learning Network in relation to Video Surveillance Monitoring which demoed LiveAction (by Actionpacked), we asked some question as to whether this product would be useful in monitoring a videoconfere...