Hi FolksWe had Codian MSE 8000 chasis which is fitted with the following blades 1) MCU blade 85102) Supervisor blade 80503) ISDN gateway 8321 We want these blades to be upgraded to the latest versions of the software.Please confirm do we require rele...
Our operator has a 7962 phone in front of them that may have up to 6 phone calls at a time.The problem we have is when an operator is already on a phone call with Caller 1 and then Caller 2 and Caller 3 call in, the softkey buttons change to Answer a...
Hello,I am looking for a Cisco document outlining the current Network Requirements for Telepresence video. I have found alot of guides and I know roughly what the values are, but I want to reference the Cisco standard to one of my clients. In going t...
Hi All,We have to integrate the below devices, just like to know the optimal/correct way of integation.1. 2 x MCU 53102. CUCM 9.x3. VCS Control 7.x4. Jabber5. C90/EX6. TMSOption 1: Registering one MCU on CUCM through SIP and one on the VCS, so that w...
Trying to find in a manual what the data port setting on my PC should be. Tried N-8-1 @ 9600, 19200, and 34800 with no luck??? Any idea is appreciated ... Thank you.
Hello, I will need to register 10 Movi clients on the VCS-E, What are the minimun requirements of licenses for it?The licenses that I have, are the following:VCS:10 Non Traversal Calls, 5 Traversal Calls, 2500 Registrations, Encryption, Interworki...
We have an EX90 that is provisioned via TMS. Systems messages can be sent and the EX90 can be configured via TMS. However, the EX90 will not display any phonebooks assigned to it in the Directory tab. When viewing the phonebook server config via the ...
Hello,I'm having an issue uploading a custom image to an MX200 running TC6.1.1. I only have one pc with access to this MX200, but the browser is not compatible so I am unable to upload the custom image thru the web interface. I am looking for the fol...
Despite changing the defaultcall protocol to SIP all calls are being placed using H323. The codec(s) is/are capable of making a SIP call. It's a choice in the directory (driven by TMS), but not the default. At this point, a factory reset isn't feasib...
Hi,I was checking the release notes for the 8.1.0 version and it shows that some ports range have been changed. I want to upgrade from 7.2.2 to 8.1.0. I need to change the range in the firewall? is it strictly necessary? For e...
