I learned that C40 codec can have at least 2 daisy chained cameras. The question is, how can I control the two cameras seperately each other via provided remote control?
I learned that C40 codec can have at least 2 daisy chained cameras. The question is, how can I control the two cameras seperately each other via provided remote control?
The fact that the LDAP sync interval/time is static in TMS causes a lot of headaches for organizations that are rapidly deploying provisioned endpoints to their user base. They either have to wait for the nightly sync or manually log in to TMS and k...
Hi Guys,I'd like to ask your valuable advice about a question one of our customers recently raised; here is the long story short:after his ISP upgraded a Radvision GK, customer experienced no video in, on his C20s, on multi point conferences (video w...
I have to downgrade my C20 from 5.x to 3.x because in 4+ version I has issues with video-freeze during 5-7 minute of a call when I connects to Sony codec (G50). When I had 3.x version it worked fine. My devices were shipped with 3.0 version.When I tr...
We supervise codec's using TMS.TMS can not connect the codec after network of codec changed .We are checking network..What is port that TMS use when TMS give phonebook to Codec and connect to codec?then dose TMS use SNMP port only(161,162)? or other ...
I'm having some issues with TMS autoconnect. In TMS Administrative tools > Conference Connection/Ending Options, there are options for connection attempts and connection timeout, but I can't see any options for time between connection attempts.This ...
Any see this in the guide?http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Virtual_Machine_Deployment_Guide.pdfVCS IaaS deployment minimum requirement are -VM Host operational and running ESXi 4.1 or ESXi5.0 ...
Hi, Seek advise whether the new telepresence isdn link box support isdn-10 connection? Thanks.TFSent from Cisco Technical Support iPhone App
Hello,Coulld someone guide on how to edit the configuration template in TMS legayc once the tempalte is uploded. I cant seem to figure out how to do it.I have done it on TMS PE before and it was much simpler. Not sure what i am missing on TMS legacy....
Hi Alli have c 90 integration with AMX device firmware 1.30.8 and Master Firmware 3.60.453 . By default TC 4XX software was running in C90 and all feature working fine . as I upgrade TC 4 to TC 5 I face some issue .After upgarde C90 Codec Stop resp...
In cisco call manager 6.1.5.13900-4. When I am deleting IP phone the system give me a error."Error occurred. one or more recorded did not get deleted. could not do a physical-order read to fetch next row.The above error are getting some time.Please c...
Hi all,Last weekend we upgraded our CUCM from version 7.x to UCS with version 8.6.2.20000-2. We are still using the CTSManager but we want to test the CTS endpoints with the TMS. The problem is when we discover the CTS room with the TMS... we lost th...
Dear All,I am new in Cisco TelePresence and i want to learn this technology.Can anyone share the implemenation or desgin gudies from learning point of view.I will be very thankful.Regards,Malik.
What exactly is required to allow the phonebooks from TMS to be displayed on a video endpoint such as and EX90 that is registered to a VCS-Expressway from across the internet?The docs are rather vaugue on this point, stating only that you need to set...
Can someone please advise a way to "auto-pair" the Cisco Touch Panel if it gets disconnected? We have setup several Touch Panels, paired to Codecs and would like them to automatically establish the pairing relationship if communications get broken wi...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 08:22 AM | ||
04-25-2024 05:00 PM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM |