9971 IP phone (CUCM) calling Movi?

[rfrome]

Can someone point me to a doc on how my CUCM phones can call a Movi Client and vice versa?

thx,

robert

[gilbert spoor]

Www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf

Sent from Cisco Technical Support iPad App

[rfrome]

Gilbert,

actually that docuemnt has nothing in regards to having a CUCM registered IP phone being able to call Movi.

If my movi clients all have the SIP URI of firstname.lastname.movi@customer.com, how do I equate that to a dialable digit string from the CUCM side?

rf

[gilbert spoor]

Hi Rf,

I know that it is still not possible to call a SIP URI from the cucm world but there are a few ways of doing this.

One way of doing it is to use Findme Accounts on the VCS. Create a prefix that would make the dial string point to the sip trunk towards the VCS and there create a transform to cut off the IP address of the sip request and change that into a domainname or cut it all off. create findme accounts that match the dial string and forward it into the SIP uri of the Movi account.

hope that makes things clear ;-)  if it doesn't let me know