Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

9971 to substitute E20

Does someone know if is it posible to register the 9971 directly on a Cisco TelePresence VCS?

what about auth, dual stream, firmware upgrades, etc?

thanks

  • TelePresence
Everyone's tags (2)
3 REPLIES
Silver

9971 to substitute E20

Hi Elter,

VCS does not support upgrading the devices automatically. I dont believe it is compatible with the VCS. Although I would suggest that you try to register it using SIP and share the results.

Regards,

Mubashshir Akhtar

Thanks Mubashshir Akhtar

9971 to substitute E20

Hi Elter,

As of now, registration of 9971 is not possible with VCS. It can be only registered with CUCM which can manage Auth, Dual Stream and Firmware Upgrades.

Firmware Upgrades from Tandberg Line of Products will be only possible if you go for Telepresence Management Suite.

Regards,

Saurabh

New Member

Re: 9971 to substitute E20

Thanks for the responses...

On the EoS annoucement it points the 9971 as the sustitute for the E20.

The E20 is very versatile, because it can be provisioned, but can also be registered as SIP and now H323 as standalone device.

The EX60 is much bigger (and expensive) than the E20.

The 9951 datasheet mencion that it can only be used with CUCM, but the 9971 datasheet said:

"SIP interoperation with the call control and partner applications enables a rich unified communications solution"

This cause some confusion...

Wich model that can be registered in 3rd Party SIP Servers and/or Gatekeeper will be positioned between the Jabber Video and the EX60?

regards      

461
Views
0
Helpful
3
Replies
This widget could not be displayed.