Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding a Cisco SX20 to Communications Manager ver. 10.5

Hello everyone!

Someone can help me, I am trying register my endpoint SX20 to CUCM ver. 10.5.

Do you have any procedure that can show me, How do that configuration?

Tks,

CB

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions

Try this: http://www.cisco

Try this: 

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc70-on-ucm912.pdf

Its mostly similar to CUCM 10.5. The one setting is enabling Early offer on the SIP profile, make sure you select best effort.

Please rate useful posts.
1 REPLY

Try this: http://www.cisco

Try this: 

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc70-on-ucm912.pdf

Its mostly similar to CUCM 10.5. The one setting is enabling Early offer on the SIP profile, make sure you select best effort.

Please rate useful posts.
2166
Views
5
Helpful
1
Replies
CreatePlease to create content