Does anybody know the range of this microphone besides just the front max distance that is documented? We have a pretty wide room where we swapping out a 1310 with a C90, and the screens are already in place. The room is about 40' wide and 30' long.
For a room that size, you'd be best looking at spreading multiple microphones around the room to capture the audio from all positions adequately (and at similar volume levels). As the C90 allows up to 8 microphones to be direcly connected, it's designed for that sort of thing. Alternately, you could run all the mics in the room back to a central mixer/dsp and then send a single feed in to the codec (we do this for most of our larger rooms).
As a general rule of thumb with the AudioScience microphones, we tell people to be within a 2m (6.5') radius for the best/consistent audio levels - obviously someone closer to the microphone will appear louder than someone further away - this can be lessened with the use of multiple mics as above..
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.