Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Back up configure and phonebook C series

Hello There

       anybody can advice me

thank you

6 REPLIES

Back up configure and phonebook C series

Log in to codec using WIN SCP , user : root

Note : “root “ user is disabled by default for TC 4.x , 

Enable root setting : systemtools rootsettings on

Go to config folder & copy pb.xml file to PC.

Restore : Copy pb.xml file from PC and paste it to config folder

Note : This backup file can be used for same end point and also used for other endpoints .

Back up configure and phonebook C series

Hello Saurabk Gupta

    pb.xml <<<<

Back up configure and phonebook C series

This contains all your current phonebook contacts which are set on the system... you can also add new contacts in this file and reboot the codec ....which will come up on the codec...

Back up configure and phonebook C series

Thank you so much

Back up configure and phonebook C series

you can mark your question as answered and give me rating according to the response time... I would appreciate it..

New Member

Back up configure and phonebook C series

In order to back up the configuration also for the C-series endpoints which is explained also for the E-series under URL:

http://www.cisco.com/en/US/docs/telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.pdf

To backup the system settings you must login to the C-series as root using SCP (or WinScp), and make a copy of the configuration database file.

The file is located at: /mnt/base/active/config.db

495
Views
4
Helpful
6
Replies