I wanted to know if there are known or best practice use cases for Video Conferencing when deploying a MCU, VCS, VCS-E.
Also, how do you handle endpoint video security or protection, for ex, like having units with auto answer off, or if you have auto answer off, you have to have educated users put Do Not Disturb when not using the Device. Encrypting calls whenever possible etc...
Also, how do you protect against SIP Scanning or non approved utilization of Bridge ports?
Is there a way to restrict usage of the Conference Factory feature to certain devices or subset of users?
Bear in mind that point 2 in that blog - H.323 packet inspection - is known to break more things than it fixes - so be careful if deciding to turn it on.
The auto-answer (point 3) is more of a per company, or per unit setting - there's not a one rule fits all solution - different uses will required different configurations. We have a mix throughout or environment, some On, some On with Mic muted, some Off.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...