Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BFCP through CUBE

Hi!

Is it possible to pass BFCP/UDP thru IOS CUBE (not the SP Edition)?

We have following setup:

CTSendpoint(1.8)>---------<UCM(8.6.2)>-----<SIP trunk>-------<CUBE 2821/15.1(4)>-----Zone------<VCS X5.1>-----------------<TP8710 (2.2)>

                                                                                                                                                |-----other SIP video endpoints

All standard video content is passed thru normally, but how about BFCP and presentation content? I know that SBC @ ASR1000 has support for that, but is there way to do same with IOS based cube???

/Mikko

Everyone's tags (5)
2 REPLIES

Re: BFCP through CUBE

Hi Mikko!

For now I would assume not, as I see the CUBE like a MTP / RSVP / TRP which is ruled out:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08video.html#wp1154149

I would assume that more is coming in the future.

You should also consider about upgrading your VCS to X7.x.

With an VCS-E instead of the CUBE I could picture you deployment would work

Maybe Andreas has some more info.

Please remember to rate helpful responses and identify

New Member

Re: BFCP through CUBE

Hi Martin.

Thanks for info - it looks like that given link describes case I'm falling into

I need to think about VCS-E, although in my case, it is not fastest solution...

/Mikko

1061
Views
4
Helpful
2
Replies
CreatePlease login to create content