I believe there is a bug in the MCU software. When i look at the previous participants-list on a conference, I see that sometimes users from other conferences are displayed here. I have double-checked the call history from the VCS so I am quite sure that they are calling the correct number. I have also tried to PIN-enable one of the conferences, and the list still shows new participants that are not connecting to this conference. This happens to all of the conferences, not only one. The MCU are in a cluster with 2 mcus.
The MCUs are in the default subzone with authentication policy set to check credentials. All the calls are going through sip registrar or h323 gatekeeper, and I know that all the calls have been placed to the mcu, but not to the conferences that lists the users.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...