It is important to understand the concept of Camera Presets. Whenever you save a camera preset, the preset will save all the camera positions connected to your codec. Hence, all the camera positions will be saved. When you recall that particular preset, all the cameras will come back to the same positions as they were at the time when you saved that preset.
In your scenario, if you want only one camera to move and if you wish to save the preset for one camera, I would recommend that you set any 1 camera to the postition you want and set all the other cameras to the default position. You might need to do the step above in order to save the preset for all individual cameras.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...