Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

c40-ISDN Link with E1

Hello,

We going to have ISDN Link to be paired with C40, and PRI 30 Channels. I would like to know the dialing format, can we call to other endpoints with the PSTN number, or do we need to dial the " ip address;h320 number" format?

Can we able to dial to other endpoints like polycom?

tnx

Bobby

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Green

You only need to dial the old

You only need to dial the old complicated format number string when running the original IL1.0 firmware on the ISDNLink.

If you upgrade it to IL1.1.x (pick the latest version as it has the OpenSSL Heartbleed fixes in it) you can just select H.320 as the protocol and dial the number.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
1 REPLY
VIP Green

You only need to dial the old

You only need to dial the old complicated format number string when running the original IL1.0 firmware on the ISDNLink.

If you upgrade it to IL1.1.x (pick the latest version as it has the OpenSSL Heartbleed fixes in it) you can just select H.320 as the protocol and dial the number.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
41
Views
0
Helpful
1
Replies
CreatePlease to create content