Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

C90 sending multiple streams to TCS

Hi all,

I have a C90:

  1. Input 1: Main Camera
  2. Input 2: SDI CCTV Camera
  3. Input 3: HDMI Laptop

I would like to know if it is possible to send more than 2 video streams to the TCS for recording.

Meaning to say, id like to record all 3 input on my TCS.

Or can the TC console software be used to achieve my objective

2 REPLIES

Re:C90 sending multiple streams to TCS

No, you can only send a maximum of two videostreams to the TCS; PIP, Joined or Stacked, but yes, you should be able to do what you want by using the TC Console.

/jens

Please rate replies and mark questions " answered " if applicable.


Sent from Cisco Technical Support Android App

Please rate replies and mark question(s) as "answered" if applicable.

Re:C90 sending multiple streams to TCS

I agree with Jens, the only way to achieve your need is by using Cisco TC Console. With TC Console, you can put more than one video input in the same video frame, so that you can send two video inputs in the main channel and one another video input in the content channel, or vice versa, for example.

In the below example, when you start sharing presentation, you will have INPUT 1 and 2 sent in the main channel and presentation in the content channel:

TC Console.png

I hope this help.

Regards

Paulo Souza

Please rate replies and mark question as "answered" if applicable.

Paulo Souza Was my response helpful? Please rate useful replies and remember to mark any solved questions as "answered".
264
Views
6
Helpful
2
Replies
CreatePlease to create content