cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
488
Views
0
Helpful
1
Replies

Cable specification for CTS3010 and CEILING VISUALIZER VZ-C32 (WOLFVISION) Doubt

alberto.orden
Level 1
Level 1

Hi to all          

Can you confirm the cable specification to connect the Document Camera to the CODEC and which way round it needs to go?

As I understand it we need a DVI (Camera end) to HDMI (CODEC end) cable plus one CAT5/CAT6 cable.  Can you please clarify?    

Best regards 

1 Accepted Solution

Accepted Solutions

Paula Talamo
Cisco Employee
Cisco Employee

Hello Alberto,

You are correct.  You will need an ethernet cable (CAT5 is fine) from the camera to the primary codec as well as a DVI-HDMI video cable from the camera to the primary codec.

HTH,

Paula

View solution in original post

1 Reply 1

Paula Talamo
Cisco Employee
Cisco Employee

Hello Alberto,

You are correct.  You will need an ethernet cable (CAT5 is fine) from the camera to the primary codec as well as a DVI-HDMI video cable from the camera to the primary codec.

HTH,

Paula

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: