Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cable specification for CTS3010 and CEILING VISUALIZER VZ-C32 (WOLFVISION) Doubt

Hi to all          

Can you confirm the cable specification to connect the Document Camera to the CODEC and which way round it needs to go?

As I understand it we need a DVI (Camera end) to HDMI (CODEC end) cable plus one CAT5/CAT6 cable.  Can you please clarify?    

Best regards 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Cable specification for CTS3010 and CEILING VISUALIZER VZ-C32 (W

Hello Alberto,

You are correct.  You will need an ethernet cable (CAT5 is fine) from the camera to the primary codec as well as a DVI-HDMI video cable from the camera to the primary codec.

HTH,

Paula

1 REPLY
Cisco Employee

Cable specification for CTS3010 and CEILING VISUALIZER VZ-C32 (W

Hello Alberto,

You are correct.  You will need an ethernet cable (CAT5 is fine) from the camera to the primary codec as well as a DVI-HDMI video cable from the camera to the primary codec.

HTH,

Paula

305
Views
0
Helpful
1
Replies
CreatePlease to create content