Call Public IP from CUCM via Expressway C E

[Amine Majdi]

Hi expert, 

My enrvironment is  : 

• CUCM 10.5 
• IM&P  10.5 
• Expressway C X8.1.1
• Expressway E X8.1.1
• No VCS 

I want to make call from jabbe or SX20 register in CUCM to public IP adresse via Expressway C and E. 

I Configuered a SIP trunk between CUCM and Expressway C. So How can I configuer patern match for redirect IP to Expressway C or other thing? 

for information : I test with a simple Patern match with 6XXX it work fine. 

Other question : when I call IP adresse from jabber. it delet all point for exemple when I type 173.194.112.17 jabber call 17319411217 

I test with jabbervideo@<ipaddress> (any idia ?) 

[George Thomas]

CUCM doesnt support IP address dialing. In your case, you will have to dial jabbervideo@domain.com. You can also do this workaround as mentioned in appendix 8. 

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.pdf