Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Call Public IP from CUCM via Expressway C E

Hi expert, 

My enrvironment is  : 

  • CUCM 10.5 
  • IM&P  10.5 
  • Expressway C X8.1.1
  • Expressway E X8.1.1
  • No VCS 

I want to make call from jabbe or SX20 register in CUCM to public IP adresse via Expressway C and E. 

I Configuered a SIP trunk between CUCM and Expressway C. So How can I configuer patern match for redirect IP to Expressway C or other thing? 

for information : I test with a simple Patern match with 6XXX it work fine. 

Other question : when I call IP adresse from jabber. it delet all point for exemple when I type 173.194.112.17 jabber call 17319411217 

I test with jabbervideo@<ipaddress> (any idia ?) 

1 REPLY

CUCM doesnt support IP

CUCM doesnt support IP address dialing. In your case, you will have to dial jabbervideo@domain.com. You can also do this workaround as mentioned in appendix 8. 

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.pdf

 

Please rate useful posts.
171
Views
0
Helpful
1
Replies
CreatePlease to create content