Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

Hi there,

I'm unable to do that, I got only FullHd@25fps from the MCU (4 Mbit/s). The MCU and C Codec is set to "Favor motion" and the 60fps checkbox at MCU side is enabled. What is wrong?

10 REPLIES
Cisco Employee

Re: Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

What is main camera quality configuration on C40?

This parameter should set to “motion” (xConfiguration Video Input Source 1 Quality:motion).

On MCU side…,

Media ports: Full HD

Motion / sharpness tradeoff: Favor motion or Balance

Maximum video size: Receive MAX, transmit MAX

Check: Enable transmission of 60fps

Then you should get 720p@60 on both direction.

=============================================================

xsta sys

*s SystemUnit ProductType: "TANDBERG Codec"

*s SystemUnit ProductId: "TANDBERG Codec C40"

*s SystemUnit ProductPlatform: "C40"

*s SystemUnit Software Application: "Endpoint"

*s SystemUnit Software Version: "TC5.0.0.273156"

xsta call

*s Call 2 Status: Connected

*s Call 2 Direction: Outgoing

*s Call 2 Protocol: "h323"

*s Call 2 CallType: Video

*s Call 2 ReceiveCallRate: 4000

xsta media

*s MediaChannels Call 2 IncomingVideoChannel 21 ChannelRole: Main

*s MediaChannels Call 2 IncomingVideoChannel 21 Video Protocol: H264

*s MediaChannels Call 2 IncomingVideoChannel 21 Video FrameRate: 60

*s MediaChannels Call 2 IncomingVideoChannel 21 Video ResolutionX: 1280

*s MediaChannels Call 2 IncomingVideoChannel 21 Video ResolutionY: 720

*s MediaChannels Call 2 OutgoingVideoChannel 22 ChannelRole: Main

*s MediaChannels Call 2 OutgoingVideoChannel 22 Video Protocol: H264

*s MediaChannels Call 2 OutgoingVideoChannel 22 Video FrameRate: 60

*s MediaChannels Call 2 OutgoingVideoChannel 22 Video ResolutionX: 1280

*s MediaChannels Call 2 OutgoingVideoChannel 22 Video ResolutionY: 720

=============================================================

New Member

Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

All settings at MCU side AND c40 side are set as you recommended, but still no luck, video resolution is still FullHD at 25fps.

MCU 4520 firmware: 4.3(2.18)

C40 firmware: TC5.1.3.292001

Cisco Employee

Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

Hi,

What is your optimal definition threshold settinfgs?

xConfiguration Video Input Source 1 OptimalDefinition Threshold60fps

New Member

Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

xConfiguration Video Input Source 1 OptimalDefinition Threshold60fps

*c xConfiguration Video Input Source 1 OptimalDefinition Threshold60fps: 1280_720 ** end

I changed this to other values without success.

Cisco Employee

Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

Do you have Premium Resolution option on your C40 Endpoint (option key starting 1R000)?

You able to double check this by executing “xsta system” command and should see “SystemUnit Software OptionKeys PremiumResolution: "true"” if your C40 have PR option key.

New Member

Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

Hi Tomonori,

Yes: *s SystemUnit Software OptionKeys PremiumResolution: "true"

Thanks

Cisco Employee

Re: Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

Just double check…, I assume you have rebooted MCU after you modified media ports setting to Full HD. (MCU require system restart after any modification on media port setting).

Otherwise better to review full MCU and C40 configuration as this should be quite easy feature to make 720p@60 to works…

New Member

Re: Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

The media port mode is set to HD+. According to the online help this should work with 720p@60fps. All other settings are doublechecked, systems are rebooted but no success. If you agree, the next step is to open a service request.

Cisco Employee

Re: Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

Yes, please open case with TAC with MCU configuration file, “xconfig” & “xsta” log from C40 and probably with H.323/SIP syslog from MCU which will help us to identify quickly what configuration may missing.

As I posted the call status from C40 and MCU, 720p@60 is definitely working between MCU and C40.

Cisco Employee

Can Cisco C40 send/receive 720p@60fps to a 4520 MCU?

And here is call status between C40 as example.

691
Views
0
Helpful
10
Replies
CreatePlease to create content