Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

can sx20 support webrtc? my sx20 is not answer for DTLS....

 

Hello I am bk...

Now I try  webrtc communicate with sx20.    I send invite message include  SRTP SDP. 

but sx20 answer normal RTP SDP.  anyone know why?

webrtc show "NO-DTLS ERROR, NEED FINGERPRINT"

 

sx20 is not support fingerprint?

 

please help me.

send message (webrtc)

invite v=0
o=Mozilla-SIPUA-29.0.1 4249 0 IN IP4 125.143.7.84
s=SIP Call
t=0 0
a=ice-ufrag:2b83e6b9
a=ice-pwd:98fdbface05ed4bfeaa266203671b205
a=fingerprint:sha-256 89:8E:5E:0D:A2:5D:52:0F:FD:09:9F:58:03:AC:F7:09:F9:F7:BD:32:5A:B0:84:53:1D:59:03:65:06:75:49:E5
m=audio 63502 RTP/SAVPF 109 0 8 101
c=IN IP4 172.17.2.241
a=rtpmap:109 opus/48000/2
a=ptime:20
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
a=setup:actpass
a=candidate:0 1 UDP 2128609535 172.17.2.241 63502 typ host
a=candidate:4 1 UDP 2128543999 169.254.38.230 63503 typ host
a=candidate:8 1 UDP 2128478463 192.168.146.1 63504 typ host
a=candidate:0 2 UDP 2128609534 172.17.2.241 63505 typ host
a=candidate:4 2 UDP 2128543998 169.254.38.230 63506 typ host
a=candidate:8 2 UDP 2128478462 192.168.146.1 63507 typ host
a=rtcp-mux
m=video 63508 RTP/SAVPF 120
c=IN IP4 172.17.2.241
a=rtpmap:120 VP8/90000
a=sendrecv
a=rtcp-fb:120 nack
a=rtcp-fb:120 nack pli
a=rtcp-fb:120 ccm fir
a=setup:actpass
a=candidate:0 1 UDP 2128609535 172.17.2.241 63508 typ host
a=candidate:4 1 UDP 2128543999 169.254.38.230 63509 typ host
a=candidate:8 1 UDP 2128478463 192.168.146.1 63510 typ host
a=candidate:0 2 UDP 2128609534 172.17.2.241 63511 typ host
a=candidate:4 2 UDP 2128543998 169.254.38.230 63512 typ host
a=candidate:8 2 UDP 2128478462 192.168.146.1 63513 typ host
a=rtcp-mux

 

 

receive message(from sx20)


v=0
o=tandberg 49 1 IN IP4 172.17.2.76
s=-
b=AS:6000
t=0 0
m=audio 60000 RTP/AVP 0 8 101
c=IN IP4 125.143.7.101
b=TIAS:64000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtcp:60001 IN IP4 125.143.7.101
a=ice-pwd:2zQk93ayBbAaitxadlVl2g
a=candidate:1 1 UDP 2130706431 172.17.2.76 2476 typ host
a=candidate:1 2 UDP 2130706430 172.17.2.76 2477 typ host
a=candidate:4 1 UDP 16777215 125.143.7.101 60000 typ relay raddr 172.17.2.76 rport 2476
a=candidate:4 2 UDP 16777214 125.143.7.101 60001 typ relay raddr 172.17.2.76 rport 2477
a=sendrecv
a=ice-ufrag:gy9j
m=video 0 RTP/AVP 0
c=IN IP4 125.143.7.101

2 REPLIES

I haven't seen any end-points

I haven't seen any end-points from any vendors which supports WebRTC at this stage, you need to use a third party service or product such as BlueJeans,Pexip or Acano.

/jens

Please rate replies and mark question(s) as "answered" if applicable.

 

Please rate replies and mark question(s) as "answered" if applicable.
New Member

HelloI try following

Hello

I try following sequence

endpoint(firefox)  ->   web signal server(receive SDP and make invite)   -> SX20....

SX20 receive invite message and return answer ...  just sx20 answer has not SRTP content...

I just want to know .... sx20 support WEBRTC  DTLS...

155
Views
4
Helpful
2
Replies