Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cannot Access to Cisco VCS Control by console

Hi All,

I have a problem with a Cisco VCS control in my network. firstly i remark that the endpoint are not registered to thee VCS, i try to access to the VCS  by web but i cannot ( i cannot ping it also). 

I choose to connect to the VCS by Console but the only information that i can have are :

#############################################################

   Phoenix - AwardBIOS v6.00PG
   Copyright (C) 1984-2006, Phoenix Technologies, LTD

(G083-071)NSB-1083 Series                 BIOS V2.1

Main Processor : Intel(R) 2.80GHz(267x10.5)                             , 2 CPUs
Memory Testing :  4185024K OK+  8M shared memory

  Memory Frequency For DDR2 667  (Dual Channel Mode)
Detecting IDE drives ...
IDE Channel 2 Master : SMART Lite SATA Drive FER1.196
IDE Channel 3 Master : WDC WD2503ABYX-01WERA1 01.01S02

 

Press DEL to enter SETUP

06/23/2010-i965-ITE8712-G083-XXXC-00

#############################################################

ALso on the front screen there is nothing.

 

Please, could someone help to know what is the problem.

thanks in advance

regards

CHAM

 

45
Views
0
Helpful
0
Replies