We have 20 or so MX200s/300s/EX90s in our environement.
We have VCS Control running 7.0.1.
All the endpoints are running TC5.1.2.
And we have an MCU 4501 running 4.3(2.18)
During an ad-hoc multiway call i have 3 - 4 endpoints in a single call. I can change the screen layout with the touchpanel (click the meeting on the bottom of the touchpanel, choose camera control, toggle the up/down and this switches the layout) but only 4 different layouts are available. How can i make other layouts available for the end user? As an admin i can log into the 4501 and choose from a wide array of layouts.
Is it possible to make all of these layouts available from just the touchpanel for our end users? Is there an easier way for the end user to change the layout from the touchpanel?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4