Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco C60 or Cisco C90 three-party conference

Dear Experts,

Do codecs Cisco C60 or Cisco C90 which have MultiSite optional key allow us to display image on separate screens during multi-point conference, e.g. to display each participant on a separate screen connected to codec during three-party conference?

Your quick response is highly appreciated.

 

Regards,

Nick

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Yes, you can do this with the

Yes, you can do this with the Compositor API, or the TC Console software to create custom layouts.

You can display multiple cameras on the same screen, or different sources on multiple screens, or combinations of the above depending on whether a presentation is being shown, etc.

The devices are quite flexible.  (Note: this doesn't work on a C40 - it needs to be a C60 or C90).

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
1 REPLY
VIP Purple

Yes, you can do this with the

Yes, you can do this with the Compositor API, or the TC Console software to create custom layouts.

You can display multiple cameras on the same screen, or different sources on multiple screens, or combinations of the above depending on whether a presentation is being shown, etc.

The devices are quite flexible.  (Note: this doesn't work on a C40 - it needs to be a C60 or C90).

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
63
Views
5
Helpful
1
Replies
CreatePlease to create content