When user watching video and its about three hours long, player says that cannot play recording an error has occurred? this happends after one hour or after two hour. Is there timeouts or something that make it happens? Or is it silverlight problem? firewall timeout some port or protocol? What should i check or do?
Looks like the video is not transcoded correctly because of which this problem is occuring. This generally happens if video is very long. You can try re-transcoding again and this would solve the problem.
To re-transcode do the following:
1. Select the VOD and go to Manage Outputs.
2. Uncheck Viewable in the Content Server web interface checkbox and click save.
3. Again click on Viewable in Content Server web interface check box and select the
Outputs to view in the Content Server web interface appropriately as desired and click save.
This will make TCS to re-transcode the VOD again. You can check the transcode queue to check the progress of transcoding. Go to Diagnostics >> Transcoding queue. Once this finishes you can check the video by playing it again.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...