Cisco CTS with Codian MCU

[Wee Teck Ng]

Dear Readers,

Any idea whether Cisco CTS support duo video in Codian MCU?

I tried sending presentation from CTS1300 in a MCU call but the presentation is sending as main video. CTS version 1.9.0 and Codian 4.3.

Is there any settings to be changed in CUCM or Codian to get it work?

Sent from Cisco Technical Support iPhone App

[Jonathan Schulenberg]

BFCP over UDP was added to CTS 1.8 which is required for presentation sharing to work. Without BFCP the CTS can only transmit a single video stream and must switch between the cameras and the content sharing.

Depending on your CUCM and VCS versions additional effort is required to get successful negotiation of BFCP across the SIP trunk. Take a look at this document, specifically Appendix 12:

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf

Please remember to rate helpful responses and identify helpful or correct answers.